ZyXEL Communications ZyWALL USG 300 User Manual page 64

Chapter 4 Wizard Setup
The following table describes the labels in this screen.
Table 11 Registration
LABEL
Device Registration
new myZyXEL.com
account
existing
myZyXEL.com
account
UserName
Check
Password
Confirm Password
E-Mail Address
Country Code
Trial Service
Activation
IDP/AppPatrol
Anti-Virus
Content Filter
Close
Next
64
DESCRIPTION
If you select existing myZyXEL.com account, only the User
Name and Password fields are available.
If you haven't created an account at myZyXEL.com, select this
option and configure the following fields to create an account and
register your ZyWALL.
If you already have an account at myZyXEL.com, select this option
and enter your user name and password in the fields below to
register your ZyWALL.
Enter a user name for your myZyXEL.com account. The name
should be from six to 20 alphanumeric characters (and the
underscore). Spaces are not allowed.
Click this button to check with the myZyXEL.com database to
verify the user name you entered has not been used.
Enter a password of between six and 20 alphanumeric characters
(and the underscore). Spaces are not allowed.
Enter the password again for confirmation.
Enter your e-mail address. You can use up to 80 alphanumeric
characters (periods and the underscore are also allowed) without
spaces.
Select your country from the drop-down box list.
You can try a trial service subscription. After the trial expires, you
can buy an iCard and enter the license key in the Registration
Service screen to extend the service.
Select the check box to activate a trial. The trial period starts the
day you activate the trial.
Click Close to exit the wizard.
Click Next to save your changes back to the ZyWALL and activate
the selected services.
ZyWALL USG 300 User's Guide