ZyXEL Communications ZyWALL USG 300 User Manual page 649

Table 193 Object > User/Group > Setting (continued)
LABEL
Limit ... for
administration
account
Maximum number
per
administration
account
Limit ... for
access account
Maximum number
per access
account
User Lockout
Settings
Enable logon
retry limit
Maximum retry
count
Lockout period
Force User
Authentication Policy
Total Policy
Policy per page
Page x of x
#
Schedule
ZyWALL USG 300 User's Guide
DESCRIPTION
Select this check box if you want to set a limit on the number of
simultaneous logins by admin users. If you do not select this,
admin users can login as many times as they want at the same
time using the same or different IP addresses.
This field is effective when Limit ... for administration account
is checked. Type the maximum number of simultaneous logins by
each admin user.
Select this check box if you want to set a limit on the number of
simultaneous logins by non-admin users. If you do not select this,
access users can login as many times as they want as long as they
use different IP addresses.
This field is effective when Limit ... for access account is
checked. Type the maximum number of simultaneous logins by
each access user.
Select this check box to set a limit on the number of times each
user can login unsuccessfully (for example, wrong password)
before the IP address is locked out for a specified amount of time.
This field is effective when Enable logon retry limit is checked.
Type the maximum number of times each user can login
unsuccessfully before the IP address is locked out for the specified
lockout period. The number must be between 1 and 99.
This field is effective when Enable logon retry limit is checked.
Type the number of minutes the user must wait to try to login
again, if logon retry limit is enabled and the maximum retry
count is reached. This number must be between 1 and 65,535
(about 45.5 days).
Use this section to specify when users must log in to the ZyWALL
before the ZyWALL routes HTTP traffic for them. Once users have
logged in, the ZyWALL can enforce user-aware policies.
This section displays the conditions that are applied, in sequence,
to decide what the appropriate action is.
By default, LAN users do not have to log into the ZyWALL.
Click a column's heading cell to sort the table entries by that
column's criteria. Click the heading cell again to reverse the sort
order.
This is the number of entries configured.
Select how many entries to display per page in the screen.
This is the number of the page of entries currently displayed and
the total number of pages of entries. Type a page number to go to
or use the arrows to navigate the pages of entries.
This field is a sequential value, and it is not associated with a
specific condition.
This field displays the schedule object that specifies when this
condition applies. It displays none if this condition always applies.
Chapter 37 User/Group
649