The Anti-Spam Black Or White List Add/Edit Screen - ZyXEL Communications ZyWALL USG 300 User Manual

Chapter 35 Anti-Spam
The following table describes the labels in this screen.
Table 177 Anti-X > Anti-Spam > Black/White List > Black List
LABEL
General Settings
Enable Black List
Checking
Black List Spam
Tag
Total Rule
rules per page
Page x of x
#
Type
Content
Add icon
Apply
Reset

35.4.1 The Anti-Spam Black or White List Add/Edit Screen

In the anti-spam Black List or White List screen, click the Add icon or an Edit
icon to display the following screen.
Use this screen to configure an anti-spam black list entry to identify spam e-mail.
You can create entries based on specific subject text, or the sender's or relay's IP
606
DESCRIPTION
Select this check box to have the ZyWALL treat e-mail that matches
(an active) black list entry as spam.
Enter a message or label (up to 15 ASCII characters) to add to the
mail subject of e-mails that match the ZyWALL's spam black list.
This is the number of entries configured.
Select how many entries you want to display on each page.
This is the number of the page of entries currently displayed and the
total number of pages of entries. Type a page number to go to or use
the arrows to navigate the pages of entries.
This is the entry's index number in the list.
This field displays whether the entry is based on the e-mail's subject,
source or relay IP address, source e-mail address, or header.
This field displays the subject content, source or relay IP address,
source e-mail address, or header value for which the entry checks.
This column provides icons to add, activate / deactivate, edit, and
remove entries.
To add an entry, click the Add icon at the top of the column.
Click an entry's Active icon to activate or deactivate the entry. Make
sure you click Apply to save and apply the change.
Click an entry's Edit icon to edit the entry.
To delete an entry, click the entry's Remove icon. The Web
Configurator confirms that you want to delete the entry.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
ZyWALL USG 300 User's Guide