Virtual Interfaces Add/Edit - ZyXEL Communications ZyWALL USG 300 User Manual

the IP address and subnet mask; virtual interfaces cannot be DHCP clients. Like
other interfaces, you can restrict bandwidth through virtual interfaces, but you
cannot change the MTU. The virtual interface uses the same MTU that the
underlying interface uses. Unlike other interfaces, virtual interfaces do not provide
DHCP services, and they do not verify that the gateway is available.

10.15.1 Virtual Interfaces Add/Edit

This screen lets you configure IP address assignment and interface parameters for
virtual interfaces. To access this screen, click an Add icon next to an Ethernet
interface, VLAN interface, or bridge interface in the respective interface summary
screen.
Figure 164 Network > Interface > Add
Each field is described in the table below.
Table 71 Network > Interface > Add
LABEL
Interface
Properties
Interface
Name
Description
IP Address
Assignment
IP Address
Subnet Mask
ZyWALL USG 300 User's Guide
DESCRIPTION
This field is read-only. It displays the name of the virtual interface,
which is automatically derived from the underlying Ethernet interface,
VLAN interface, or bridge interface.
Enter a description of this interface. It is not used elsewhere. You can
use alphanumeric and
()+/:=?!*#@$_%-
up to 60 characters long.
Enter the IP address for this interface.
Enter the subnet mask of this interface in dot decimal notation. The
subnet mask indicates what part of the IP address is the same for all
computers in the network.
Chapter 10 Interfaces
characters, and it can be
243