ZyXEL Communications ZyWALL USG 300 User Manual page 885

Table 295 PKI Logs (continued)
LOG MESSAGE
Export X509
certificate "%s" from
"Trusted Certificate"
successfully
Export X509
certificate "%s" from
"My Certificate"
failed
Import PKCS#12
certificate "%s" with
incorrect password
Cert trusted: %s
Due to %d, cert not
trusted: %s
CODE DESCRIPTION
Algorithm mismatch between the certificate and the search constraints.
1
Key usage mismatch between the certificate and the search constraints.
2
Certificate was not valid in the time interval.
3
(Not used)
4
Certificate is not valid.
5
Certificate signature was not verified correctly.
6
Certificate was revoked by a CRL.
7
Certificate was not added to the cache.
8
Certificate decoding failed.
9
Certificate was not found (anywhere).
10
Certificate chain looped (did not find trusted root).
11
Certificate contains critical extension that was not handled.
12
Certificate issuer was not valid (CA specific information missing).
13
(Not used)
14
CRL is too old.
15
CRL is not valid.
16
CRL signature was not verified correctly.
17
CRL was not found (anywhere).
18
CRL was not added to the cache.
19
CRL decoding failed.
20
CRL is not currently valid, but in the future.
21
CRL contains duplicate serial numbers.
22
Time interval is not continuous.
23
Time information not available.
24
ZyWALL USG 300 User's Guide
DESCRIPTION
The device exported a x509 format certificate from Trusted
Certificates. %s is the certificate request name.
The device was not able to export a x509 format certificate
from My Certificates. %s is the certificate request name.
An administrator used the wrong password when trying to
import a PKCS#12 format certificate. %s is the certificate
name.
%s is the subject.
%d is an error number (see
the certificate subject.
Appendix A Log Descriptions
Table 296 on page 885), %s is
885