ZyXEL Communications ZyWALL USG 300 User Manual page 485

Click AppPatrol > Other to open the Other (applications) screen.
Figure 361 AppPatrol > Other
The following table describes the labels in this screen. See
487 for more information as well.
Table 139 AppPatrol > Other
LABEL
#
Port
Schedule
User
From
To
Source
Destination
Protocol
Access
ZyWALL USG 300 User's Guide
DESCRIPTION
This field is a sequential value, and it is not associated with a specific
condition.
Note: The ZyWALL checks conditions in the order they appear in
the list. While this sequence does not affect the functionality,
you might improve the performance of the ZyWALL by putting
more common conditions at the top of the list.
This field displays the specific port number to which this policy applies.
This is the schedule that defines when the policy applies. any means the
policy always applies.
This is the user name or user group to which the policy applies. If any
displays, the policy applies to all users.
This is the source zone of the traffic to which this policy applies.
This is the destination zone of the traffic to which this policy applies.
This is the source address or address group for whom this policy applies.
If any displays, the policy is effective for every source.
This is the destination address or address group for whom this policy
applies. If any displays, the policy is effective for every destination.
This is the protocol of the traffic to which this policy applies.
This field displays what the ZyWALL does with packets that match this
policy.
forward - the ZyWALL routes the packets.
Drop - the ZyWALL does not route the packets and does not notify the
client of its decision.
Reject - the ZyWALL does not route the packets and notifies the client
of its decision.
Chapter 29 Application Patrol
Section 29.4.1 on page
485