Ppp Interfaces - ZyXEL Communications ZyWALL USG 300 User Manual

Chapter 10 Interfaces
You must click OK in the Static DHCP screen and then click OK in the interface
add or edit screen to save your changes.
Figure 141 Static DHCP
The following table describes this screen.
Table 47 Static DHCP
LABEL
#
IP Address
MAC Address
Description
Add icon
OK
Cancel

10.6 PPP Interfaces

Use PPPoE/PPTP interfaces to connect to your ISP. This way, you do not have to
install or manage PPPoE/PPTP software on each computer in the network.
Figure 142 Example: PPPoE/PPTP Interfaces
PPPoE/PPTP interfaces are similar to other interfaces in some ways. They have an
IP address, subnet mask, and gateway used to make routing decisions; they
194
DESCRIPTION
This field is a sequential value, and it is not associated with a specific
entry.
Enter the IP address to assign to a device with this entry's MAC
address.
Enter the MAC address to which to assign this entry's IP address.
Enter a description to help identify this static DHCP entry. You can use
alphanumeric and ()+/:=?!*#@$_%- characters, and it can be up to
60 characters long.
This column lets you create and remove static DHCP entries.
To add an entry, click the Add icon.
To remove an entry, click it's Remove icon.
Click OK to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving.
ZyWALL USG 300 User's Guide