ZyXEL Communications ZyWALL USG 300 User Manual page 60

Chapter 4 Wizard Setup
Table 9 Internet Access: PPPoE Encapsulation (continued)
LABEL
User Name
Password
Retype to
Confirm
Nailed-Up
Idle Timeout
WAN IP Address
Assignments
WAN Interface
Zone
IP Address
First DNS Server
Second DNS
Server
Back
Next
60
DESCRIPTION
Type the user name given to you by your ISP. You can use
alphanumeric and -_
@$./
characters long.
Type the password associated with the user name above. Use up to 64
ASCII characters except the [] and ?. This field can be blank.
Type your password again for confirmation.
Select Nailed-Up if you do not want the connection to time out.
Type the time in seconds that elapses before the router automatically
disconnects from the PPPoE server. The default time is 100 seconds.
These fields are read-only if you selected Auto as the IP Address
Assignment in the previous screen.
This displays the identity of the interface you configure to connect
with your ISP.
This field displays to which security zone this interface and Internet
connection will belong.
Enter your WAN IP address in this field.
These fields displayd if you selected static IP address assignment.
DNS (Domain Name System) is for mapping a domain name to its
corresponding IP address and vice versa. The DNS server is extremely
important because without it, you must know the IP address of a
computer before you can access it. The ZyWALL uses a system DNS
server (in the order you specify here) to resolve domain names for
VPN, DDNS and the time server.
Enter the DNS server's IP address(es) in the field(s) to the right.
Leave the field as 0.0.0.0 if you do not want to configure DNS
servers. If you do not configure a DNS server, you must know the IP
address of a machine in order to access it.
Click Back to return to the previous screen.
Click Next to continue.
characters, and it can be up to 31
ZyWALL USG 300 User's Guide