Configure Device Ha On The Master Zywall - ZyXEL Communications ZyWALL USG 300 User Manual

6.9.2 Configure Device HA on the Master ZyWALL

Log into ZyWALL A (the master ) and click Device HA > Active-Passive Mode.
1
Click ge1's Edit icon.
Configure 192.168.1.3 as the Management IP and 255.255.255.0 as the
2
Subnet Mask. Click OK.
Figure 108 Device HA > Active-Passive Mode > Edit: Master ZyWALL Example
Set the Device Role to Master. This example focuses on the connection from the
3
LAN (ge1) to the Internet through the ge2 interface, so turn on monitoring for
the ge1 and ge2 interfaces. Enter a Synchronization Password
("mySyncPassword" in this example) and click Apply.
Figure 109 Device HA > Active-Passive Mode: Master ZyWALL Example
ZyWALL USG 300 User's Guide
Chapter 6 Tutorials
139