Ppp Interface Add Or Edit - ZyXEL Communications ZyWALL USG 1000 User Manual

Table 61 Configuration > Network > Interface > PPP (continued)
LABEL
Status
Name
Base Interface
Account Profile
Apply
Reset

13.4.2 PPP Interface Add or Edit

Note: You have to set up an ISP account before you create a PPPoE/PPTP interface.
This screen lets you configure a PPPoE or PPTP interface. To access this screen,
click the Add icon or an Edit icon in the PPP Interface screen.
ZyWALL USG 1000 User's Guide
DESCRIPTION
The activate (light bulb) icon is lit when the entry is active and
dimmed when the entry is inactive.
The connect icon is lit when the interface is connected and dimmed
when it is disconnected.
This field displays the name of the interface.
This field displays the interface on the top of which the PPPoE/PPTP
interface is.
This field displays the ISP account used by this PPPoE/PPTP interface.
Click Apply to save your changes back to the ZyWALL.
Click Reset to return the screen to its last-saved settings.
Chapter 13 Interfaces
295