Special Tools - Toro Groundsmaster 360 Service Manual

Special Tools

Order special tools from your Toro Distributor.
Wheel Hub Puller
The wheel hub puller allows safe removal of the wheel
hub from the wheel motor shaft.
Toro Part Number: TOR6004
Steering Alignment Tools
The steering alignment tools are used to ensure that the
front and rear steering assemblies are properly cen-
tered for steering assembly service. These tools are re-
quired for adjustment of wheel alignment or when
replacing tie rods. The steering alignment tool kit in-
cludes the two (2) tools necessary for use on a machine.
One of the tools centers the front steering assembly and
one centers the rear. The tool kit also includes neces-
sary hardware for attaching the tools to the machine.
Toro Part Number: TOR6019
The front alignment tool (TOR6019--1) requires the fol-
lowing hardware for attachment purposes:
1/2" -- 13 x 1" cap screw (qty. 2) (Toro part #325--4)
1/2" -- 13 x 2" cap screw (qty. 1) (Toro part #325--8)
1/2" nut (qty. 3) (Toro part #3217--9)
The rear alignment tool (TOR6019--2) requires the fol-
lowing hardware for attachment purposes:
3/8" -- 16 x 1.25" cap screw (qty. 1) (Toro part #323--7)
3/8" nut (qty. 1) (Toro part #3217--7)
1/2" -- 13 x 2" cap screw (qty. 1) (Toro part #325--8)
1/2" nut (qty. 1) (Toro part #3217--9)
Chassis
1
1. Front alignment tool
Page 6 - - 4
Figure 1
2
Figure 2
2. Rear alignment tool
Groundsmaster 360