Toro Groundsmaster 360 Service Manual page 11

Product Records and Maintenance
Table of Contents
PRODUCT RECORDS . . . . . . . . . . . . . . . . . . . . . . . . .
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EQUIVALENTS AND CONVERSIONS
Decimal and Millimeter Equivalents
U.S. to Metric Conversions
TORQUE SPECIFICATIONS
Fastener Identification
Product Records
Insert a copy of the Operator's Manual and Parts Cata-
log for your Groundsmaster 360 at the end of this chap-
ter. Additionally, if any optional equipment or
accessories have been installed to your machine, insert
the Installation Instructions, Operator's Manuals and
Parts Catalogs for those options at the end of this chap-
ter.
Maintenance
Maintenance procedures and recommended service in-
tervals for the Groundsmaster 360 are covered in the
Operator's Manuals. Refer to that publication when per-
forming regular equipment maintenance.
Groundsmaster 360
. . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
Page 2 - - 1
1 Using a Torque Wrench with an Offset Wrench
1 Standard Torque for Dry, Zinc Plated and Steel
2 Fasteners (Inch Series)
2 Standard Torque for Dry, Zinc Plated and Steel
2 Fasteners (Metric Fasteners)
3 Other Torque Specifications
3 Conversion Factors
Product Records and Maintenance
Chapter 2
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . 3
4
5
6
6