Blade Spindle - Toro Groundsmaster 360 Service Manual

Blade Spindle

RIGHT
FRONT
1. RH spindle assembly
2. Drive belt
3. Idler pulley
Removal (Fig. 6)
1. Park machine on a level surface with cutting deck
raised. Stop engine, engage parking brake and remove
key from the ignition switch. Support the cutting deck so
it cannot fall accidentally.
2. Lift the footrest, exposing the top of the cutting deck.
Support the footrest with prop rod.
3. Remove belt covers from top of cutting deck.
NOTE: When removing deck drive belt, use breaker
bar in idler arm square drive holes to rotate idler pulley
away from belt (Fig. 7).
4. Remove drive belt from deck pulleys (see Operator's
Manual).
Cutting Deck
9
Figure 6
4. Center spindle assembly
5. Idler pulley
6. Drive belt
1. Idler arm (RH shown)
2. 1/2" square drive
Page 7 - - 10
1
2
3
5
4
7. LH spindle assembly
8. Cutting deck
9. Drive pulley
3
Figure 7
3. 3/8" square drive
Groundsmaster 360
6
7
8
1
2