Storage Compartment - Toro Groundsmaster 360 Service Manual

Storage Compartment

5
3
2
4
RIGHT
FRONT
1. Cab platform
2. Storage compartment
3. Flange head screw (4 used)
4. Bulb seal
Removal (Fig. 10)
1. Park machine on a level surface, lower cutting deck
(or implement), stop engine, engage parking brake and
remove key from the ignition switch.
2. Unlatch and raise operator seat.
3. Remove four (4) flange head screws (item 3) that se-
cure storage compartment to cab platform.
4. Remove storage compartment assembly from ma-
chine.
5. Inspect all sealing components on storage compart-
ment and cab platform. Replace all seals that show evi-
dence of damage.
Operator Cab
10
8
7
9
6
1
Figure 10
5. RH foam
6. LH foam
7. Foam
8. Foam
Installation (Fig. 10)
1. Position storage compartment assembly to cab plat-
form. Secure storage compartment to cab platform with
four (4) flange head screws (item 3).
2. Lower and latch seat.
Page 8 - - 14
11
12
9. LH foam
10. RH foam
11. Foam
12. Tinnerman nut (4 used)
Groundsmaster 360