Toro Groundsmaster 360 Service Manual page 163

Deck Lift Manifold Service
CAUTION
Before opening hydraulic system, operate all hy-
draulic controls to relieve system pressure and
avoid injury from pressurized hydraulic oil. See
Relieving Hydraulic System Pressure in the Gen-
eral Information section of this chapter.
WARNING
If lift manifold is attached to machine, make sure
that cutting deck is fully lowered and supported
before loosening hydraulic lines, cartridge
valves or plugs from lift manifold. If deck is
raised as manifold components are loosened,
deck may drop unexpectedly.
IMPORTANT: The two (2) solenoid valves in the
deck lift manifold are different. Label the valves be-
fore removal so the valves can be correctly installed
into the manifold.
For cartridge valve service procedures, see Control
Manifold Cartridge Valve Service in this section. Refer
to Figure 139 for deck lift manifold cartridge valve instal-
lation torque.
Groundsmaster 360 Page 4 - - 129 Hydraulic System