Toro Groundsmaster 360 Service Manual page 114

5. Remove filter bypass plug, spring and valve from
transmission pump body. Remove and discard O--ring
from plug.
6. Remove pressure valve plug, spring and valve from
transmission pump body. Remove and discard O--ring
from plug.
7. Remove charge relief plug, spring and valve from
transmission pump body. Remove and discard O--ring
from plug.
8. Remove two (2) bolts that secure accumulator cover
to transmission pump body.
9. Remove cover, gasket, collar, spring and piston from
pump body. For assembly purposes, note that hole in
collar is toward the outside of the pump body. Discard
gasket.
10.Remove two (2) hex plugs from pump body. Remove
and discard O--rings from plugs.
11. Remove four (4) socket head plugs from pump body.
Hydraulic System
1. Filter bypass plug
1. Pressure valve plug
1. Accumulator cover
2. Collar
1
1. Hex plug (2 used)
Page 4 - - 80
2
Figure 65
2. Bypass valve
2
Figure 66
2. Charge relief plug
3
2
Figure 67
3. Piston
Figure 68
2. Socket plug (4 used)
Groundsmaster 360
1
1
1
2