Toro Groundsmaster 360 Service Manual page 72

13.If traction relief valve pressure is not met, relieve hy-
draulic system pressure (see Relieving Hydraulic Sys-
tem Pressure in the General Information section).
Remove and inspect relief valve(s) from transmission
(see Transmission Service in the Service and Repairs
section of this chapter). Clean or replace relief valve(s).
Traction relief valves are not adjustable.
Hydraulic System
14.After testing is completed, make sure that engine is
stopped and then relieve hydraulic system pressure
(see Relieving Hydraulic System Pressure in the Gener-
al Information section of this chapter). Remove pressure
gauge and tee fitting from machine. Connect pump out-
let and balancing hoses to transmission fittings.
15.If necessary, repeat pressure test for other traction
relief valves.
Page 4 - - 38 Groundsmaster 360