Konica Minolta bizhub PRO C1060L Quick Manual
  1. Manuals
  2. Brands
  3. Konica Minolta Manuals
  4. Printer
  5. bizhub pro c1060l
  6. Quick manual

Konica Minolta bizhub PRO C1060L Quick Manual

Digital printing system
Hide thumbs Also See for bizhub PRO C1060L:
Table of Contents

Advertisement

Quick Links

Quick Guide

Fiery Color Server
1
Befo re Gettin g Star ted
2
Let's Mak e P rin ts
3
Ins tallin g So ftware
4
Bas ic Op eratio ns
5
Main tain in g th e F in ish in g Qu al i ty
6
Trou bles ho otin g
7
App en di x

Advertisement

Table of Contents
loading

Related Manuals for Konica Minolta bizhub PRO C1060L

Summary of Contents for Konica Minolta bizhub PRO C1060L

  • Page 1: Quick Guide

    Quick Guide Befo re Gettin g Star ted Let's Mak e P rin ts Ins tallin g So ftware Bas ic Op eratio ns Main tain in g th e F in ish in g Qu al i ty Trou bles ho otin g App en di x Fiery Color Server...

  • Page 2: Notations And Symbols Used In This Manual

    Welcome Thank you for purchasing this machine. This Quick Guide describes basic operations, maintenance, troubleshooting for this machine. This information will be useful to enable the full capabilities of this machine and to utilize such functionality efficiently. Please keep this manual in a safe place where you can access it easily. Notations and symbols used in this manual WARNING WARNING...

  • Page 3: Intended Use

    The user's guides are intended for the following users of the system: Operator: Person who has been trained by Konica Minolta or authorized partner to operate the system for its intended use as well as manage consumables, and perform the maintenance and troubleshooting described in user's guides.

  • Page 4: Configuration And Usage Of This Guide

    Configuration and Usage of this Guide Configuration and Usage of this Guide There are two types of User's Guides for this machine: booklet manuals and User's Guide CD. When you want to learn about detailed functions or operation procedures, refer to the HTML User's Guide included in the User's Guide CD.

  • Page 5: Html User's Guide Operating Environment

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L HTML User's Guide operating environment )Supported Operating Systems/Browsers This guide describes the operation verification in the operating systems and browsers shown below. Operating system Web browser Windows Vista (Service Pack 2) Internet Explorer 9.x Windows 7 (Service Pack 1)/Windows 8 Internet Explorer 10.x...

  • Page 6: Conventions Used In This Guide

    Finisher FS-532 Finisher FS-612 Reverse Automatic Document Feeder DF-626 Saddle Stitcher SD-506 Saddle Stitcher Saddle Stitcher SD-510 The convention above is also applied to other optional devices. NOTICE The Image Controller IC-308 is not compatible with the bizhub PRO C1060L. x-iv...

  • Page 7: Table Of Contents

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Make a Note about This Machine Information Checking the mounted optional devices Get to know the optional devices mounted on this machine. You can check a part of the mounted optional devices on the [MACHINE] screen of the touch panel.

  • Page 8: Checking Network Information

    Make a Note about This Machine Information Checking network information Make a note about network information required to use functions of this machine such as printer functions and various applications. To check network information, print out the Configuration Page Print. )Printing out the Configuration Page Print From the [MACHINE] screen on the touch panel, select [Controller] - [Tools] tab - [Configuration], then press [Yes].
  • Page 9 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Contents Intended use of this machine ........... . x-i Intended use .

  • Page 10: Contents

    Contents Installing Software Installing the Printer Driver............3-1 Operating environment .
  • Page 11 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Maintaining the Finishing Quality Both Sides Adjustment............5-1 Both Sides Adjustment .
  • Page 12 Contents Appendix Good Use of the HTML User's Guide ..........7-1 (1) Let's master the search function! .

  • Page 13: Before Getting Started

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Before Getting Started Turning the Power ON/OFF )Power supply This machine has two power switches: main power switch and sub power switch. NOTICE The main power switch is normally kept turned on. The main power switch must be turned on or off only when you start this machine for the first time or when you restart this machine.

  • Page 14: Image Controller

    Turning the Power ON/OFF Turn the image controller on. For Image Controller IC-415, turn the power switch in the rear side on ( ), then press the button on the top of the power switch ( For Image Controller IC-308, turn the power switch in the rear side on ( ), then press the power button in the front side (...

  • Page 15: Turning The Power Off (Image Controller Ic-415)

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L )Turning the power off (Image Controller IC-415) On the [MACHINE] screen, press [Controller]. Press [Login]. Select [Administrator] or [Operator], enter the password, then press [Login]. The default password is "Fiery.1". If you select [Operator], you do not need to enter the...
  • Page 16 Turning the Power ON/OFF Press the [Tools] tab. Press [Restart Server]. Press [Shut Down System]. If [Shutting down] is displayed, press [x]. NOTICE While the following message is displayed, do not quit the system. Otherwise, a problem such as a toner fixation in the machine may occur.
  • Page 17 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L After the system has quit, turn off the sub power switch. The touch panel display goes off, and the Power LED on the control panel is changed from green to red. Turn off the main power switch.

  • Page 18: Turning Off The Power (Image Controller Ic-308)

    Turning the Power ON/OFF )Turning off the power (Image Controller IC-308) Turn off the sub power switch. The touch panel display is cleared, and the Power LED on the control panel is changed from green to red. NOTICE While the following message is displayed, do not turn off the main power switch.
  • Page 19 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Tips The Image Controller IC-308 can reset Fiery software or restart the entire system as needed. To reset only the Fiery software, press the Menu button on the control panel, then use the row selection button to select [Restart Server] - [Restart Server] in sequence.

  • Page 20: Power-Saving Function

    Turning the Power ON/OFF )Power-saving function Using the following functions can reduce the power consumption of this machine and provide greater power-saving effects. Function Description Power Save func- Auto Low Power Turns off the touch panel display to reduce the power consumption tion of this machine.

  • Page 21: Available Operations In This Machine

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Available Operations in this Machine Major functions of this machine )Print functions This machine can be used as a printing system by installing an optional Image Controller. You can print data on this machine via the printer driver using the application software installed on your computer.

  • Page 22: Scan Functions

    Available Operations in this Machine )Scan functions You can send the scan data as an E-mail attachment, or send it to a shared computer (SMB server) or the FTP server by mounting an optional Image Controller. In addition, you can give a scan instruction from a computer on the network to import the scan data to your computer. Tips Scan functions are not available in the Printer model.

  • Page 23: Application Functions

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Application functions )Fiery Command WorkStation Fiery Command WorkStation is an application that manages jobs and image controller via the network. Job management function The [Job Center] tab provides the functions for the job operator. You can check the job status that is being processed by the controller or that is being printed, and check an overview of the processed job.

  • Page 24: Printer Delete Utility

    Available Operations in this Machine Device control function The [Device Center] tab provides the functions for the administrator. You can check or set the settings of the image controller, set up the color, adjust the tray, define the paper or view the job log. Imposition function Using Fiery Impose (option), you can impose each page on Fiery Command WorkStation.

  • Page 25: Fiery Remote Scan

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L )Fiery Remote Scan Fiery Remote Scan is an application that is used to perform remote scanning, to import a file from the E-mail box and save it on the computer, or to import scanned data into the application to edit it. For details about how to use this application, refer to the User's Guide supplied with the Fiery Color Server.

  • Page 26: Let's Make Prints

    Printing Flow Let's Make Prints This chapter describes a basic print workflow using this machine. First confirm the basic flow to print data, then add detailed settings and adjustment to meet your requirements. Reference For information about application settings of this machine and adjustment procedures, refer to the HTML User's Guide.

  • Page 27: Step 3: Configure Information Of The Paper Loaded Into A Tray In This Machine

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Step 3: Configure information of the paper loaded into a tray in this machine Specify the type, size, weight, and other values of paper. For details, refer to page 4-5. Step 4: Use the printer driver to print data Print original data through your computer.

  • Page 28: Step 5: Check The Finishing

    Printing Flow Click the [Quick Access] tab on the setting screen of the printer driver, then select the paper size of the original data in [Document size]. Check the setting, then click [OK]. In [Paper tray], you can select a tray to load paper to be printed into. For information about other functions of the printer driver, refer to page 4-10.

  • Page 29: Installing Software

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Installing Software Installing the Printer Driver Operating environment )In a Windows environment Item Specifications Operating System Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows Server 2003, Windows Server 2003 R2, Windows Server 2008, Windows Server 2008 R2,...

  • Page 30: In A Windows Environment

    Installing the Printer Driver In a Windows environment )Installation Use the Add Printer Wizard to install the printer driver on your computer. This guide describes how to install the driver in a Windows 7 environment. A network setting must be configured on this machine before beginning the installation procedure. For details, refer to the HTML User's Guide.
  • Page 31 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L In [Type of port], select [Standard TCP/IP Port], then click [Next]. Enter the host name or IP address, then click [Next]. Click [Have Disk]. Click [Browse].
  • Page 32 Installing the Printer Driver Select [Windows_User_SW] - [Print Drivers] - [PS_drvr] - [oemsetup.inf] in the User Software DVD, then click [Open]. Click [OK]. Select the name of the printer to be installed, then click [Next]. Enter the printer name, then click [Next]. If the installation confirmation message is displayed, click [Install].
  • Page 33 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Select [Do not share this printer], then click [Next]. When using your computer as a printer server, click [Share this printer so that others on your network can find and use it], then enter the share name.
  • Page 34 Installing the Printer Driver Confirm that the printer name is displayed in [Devices and Printers]. Then, configure the default setting for the printer driver. For details, refer to page 3-7.

  • Page 35: Default Setting

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L )Default setting Check that optional information of this machine is configured correctly on the printer driver. If optional information of this machine is not configured correctly on the printer driver, you cannot use optional functions.

  • Page 36: In A Macintosh Environment

    Installing the Printer Driver In a Macintosh environment )Installation Install the printer driver on your computer from the User Software DVD supplied with this machine, then add the desired printer to the computer. This guide describes how to install the PostScript3 driver in a Mac OS X 10.8 environment and add a Bonjour- connected printer.
  • Page 37 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Click [Install]. When the screen for entering [Name] and [Password] is displayed, enter the computer administrator's name and password into the respective fields, then click [Install Software]. Select the name of the printer to be installed, then click [Continue].
  • Page 38 Installing the Printer Driver Click [Close]. Then, add a Bonjour-connected printer to your computer. In the Apple Menu, select [System Preferences], then click the [Print & Scan] icon. In OS X 10.6, click the [Print & Fax]. In OS X 10.9/10.10, click the [Printer & Scanner]. Click [+].

  • Page 39: Default Setting

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Specify the Bonjour-connected printer to be added in the [Name] list. Specifying a printer displays the appropriate printer driver in the [Use] field. If the printer driver is not displayed correctly, select [Select Printer Software], then directly specify the desired printer driver.
  • Page 40 Installing the Printer Driver Configure optional information of this machine. Click [OK]. The optional information setting of the machine is then completed. 3-12...

  • Page 41: Installing Applications

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Installing Applications Operating environment )Fiery Utility Item Specifications Operating System Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows Server 2003, Windows Server 2003 R2, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2 Mac OS X 10.6/10.7/10.8/10.9...

  • Page 42: In A Windows Environment

    Installing Applications In a Windows environment )Installation Start the installer from the User Software DVD supplied with this machine, then install Fiery Utility on your computer. To install, the computer's administrator privilege is required. Insert the User Software DVD into the DVD drive of the computer. If the installer does not start, double-click [MasterInstaller.exe] on the DVD, then proceed to Step 2.
  • Page 43 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Confirm the program folder name, then click [Next]. To automatically start Fiery Command WorkStation when logging on to the computer, click [Yes]; otherwise, click [No]. Check the total size of the software to install, then click [Next].

  • Page 44: In A Macintosh Environment

    Installing Applications In a Macintosh environment )Installation Start the installer from the User Software DVD supplied with this machine, then install Fiery Utility on your computer. This guide describes how to install Fiery Command WorkStation. Insert the User Software DVD into the DVD drive of the computer. NOTICE In OS X 10.7 or later, even when the User Software DVD is inserted into the drive, the DVD icon may not be displayed on the desktop.

  • Page 45: Starting Applications

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L When the installation has been completed, click [Close]. Installation is completed. Starting applications )Starting Fiery Command WorkStation To start Fiery Command WorkStation, first perform the login procedure. Start Fiery Command WorkStation. In Windows 7/Vista/Server 2008 R2/Server 2008/Server 2003/Server 2003 R2, open the Start menu, then click [All Programs] - [Fiery] - [Fiery Command WorkStation 5].
  • Page 46 Installing Applications Click [Connect]. Select the user privileges, then enter the password. For user privileges, you can select the following items. Administrator: Can perform all operations. Operator: Can only perform job operations. Guest: Can view information only. The default password is "Fiery.1". If [Operator] or [Guest] is selected for user privileges, you do not need to enter the password.

  • Page 47: Starting Fiery Remote Scan

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L )Starting Fiery Remote Scan To start Fiery Remote Scan, first select a Fiery Color Server to be connected. Start Fiery Remote Scan. In Windows 7/Vista/Server 2008 R2/Server 2008/Server 2003/Server 2003 R2, open the Start menu, then click [All Programs] - [Fiery] - [Fiery Remote Scan 6].

  • Page 48: Basic Operations

    Loading Paper Basic Operations Loading Paper Loading paper into the main body tray The same paper loading procedure is used for Tray 1 and Tray 2. This section describes how to load paper into Tray 1. Pull out the tray to load paper into. NOTICE Be sure to pull out the tray fully until a blue label shows on the rear- left side of the tray.
  • Page 49 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Slide the rear guide plate to any position. Determine their locations based on the size indicator of the bottom plate of the tray. To fix the side guide plates at the correct locations, load an appropriate amount of paper into the tray while aligning it to the right-hand side of the tray.

  • Page 50: Loading Paper Into The Paper Feeder Unit Pf-602M

    Loading Paper Loading paper into the Paper Feeder Unit PF-602m The following describes how to load paper into an optional Paper Feeder Unit PF-602m. The same paper loading procedure is used for Tray 3 and Tray 4. Reference For information about how to load paper into other optional paper feeder unit, refer to the HTML User's Guide. Pull out the tray to load paper into.

  • Page 51: Loading Paper In Post Inserter Of Folding Unit Fd-503

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Load the remaining paper into the tray, then press the rear guide plate against the paper. NOTICE Be careful not to load paper above the , mark that indicates the height limit on the side guide plate. Otherwise, a paper jam may occur.

  • Page 52: Paper Setting

    Paper Setting Paper Setting Specifying paper information for a tray Specify the required information (size, type, weight, and other values) for the paper loaded into a paper tray. If standard-size paper is loaded, its size is recognized automatically. To load custom-size paper, specify the required size.
  • Page 53 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Press [Paper Size]. Select one of the options under [Size Setting] to fit the paper loaded into the tray.
  • Page 54 Paper Setting Specify the size. [Standard]: Recognized automatically. In [Detect Size Setting], you can select the size to be detected. There is, however, a group of sizes having subtle distinctions, so that the machine cannot distinguish in the operation of size detection. To identify these sizes as one size so that they can be judged by the machine, you can select the size to be detected in [Detect Size Setting].
  • Page 55 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L [Tab Paper]: Specify the paper size and the number of tabs. If you select [Detect Size Setting] in [Standard], press [OK]. This returns to the [Size Setting] screen. This step is not required if you select [Custom] or [Tab Paper].
  • Page 56 Paper Setting Specify other items, if necessary. Press [OK]. This returns to the [Paper Setting] screen. Press [Close]. This returns to the [MACHINE] screen. If you press [Paper Setting] on the [COPY] screen to specify the paper size, the screen returns to the [COPY] screen.

  • Page 57: Printer Driver Setting

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Printer Driver Setting Printer driver functions This section describes how to specify the color mode using the printer driver. )[Color mode]: Select an output color Open [Color] in the Print Setting screen of the printer driver, then select [Color mode] from [CMYK] or [Grayscale].

  • Page 58: [Color Mode]: Basic Settings

    Printer Driver Setting )[Color mode]: Basic Settings To specify the basic defaults for color processing, open [Color] in the Printing Preferences window, then click [Basic Settings]. You can also change the setting for each print job. Reference You also select [Color Setup] of Fiery Command WorkStation to configure [Basic Settings] in the color mode. For details, refer to the User's Guide supplied with the Fiery Color Server.

  • Page 59: [Color Mode]: Expert Settings

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L )[Color mode]: Expert Settings To set defaults to all items for color processing, open [Color] in the Printing Preferences window, then click [Expert Settings]. You can also change the setting for each print job.

  • Page 60: Maintaining The Finishing Quality

    Both Sides Adjustment Maintaining the Finishing Quality Both Sides Adjustment Both Sides Adjustment When performing the duplex printing, you can adjust a misalignment between the front and back sides to align the printing positions on the front and back sides. This task is referred to as Both Sides Adjustment. A heat impact of the fixing unit may cause a slight enlargement or reduction of paper during printing.

  • Page 61: Scan Measurement Adjustment

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Reference If skewing or wrinkling occur during printing, adjust the registration loop amount before making the scan measurement adjustment, the gap adjustment, the chart adjustment or the zoom and image shift adjustment. For details, refer to the HTML User's Guide.
  • Page 62 Both Sides Adjustment Press [Paper Setting] on the [MACHINE] screen. Select the tray with the target paper loaded, then press [Change Set]. Press [Both Sides Adj]. Check that [Scan Meas.] is displayed, then press [Output Background Sheet].
  • Page 63 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L When the [PRINT MODE] screen is displayed, press Start on the control panel. A background sheet is printed out. If you already have the background sheet available for measurement, you do not need to print out a background sheet.
  • Page 64 Both Sides Adjustment Enter the number of adjustment charts you want to print out. You can print out 20 or more adjustment charts; however, only up to 20 adjustment charts can be scan-measured continuously. Press Start on the control panel. Adjustment charts are printed on both sides of the paper in the tray you selected in Step 2.
  • Page 65 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Place an adjustment chart on the Original Glass. Open the ADF, then place an adjustment chart with the front side facing up (not facing the Original Glass), setting the top side flush with the far end of the glass. Place the upper-left corner of the...
  • Page 66 Both Sides Adjustment Press [Start] on the [Scan Adjustment Chart] screen. The adjustment chart is scanned. When scanning is properly completed, the counter of [Number of Scanning] on the Scan Adjustment Chart screen is added by one, and the blue frame displayed in the illustration on the screen shifts to the next one on the right side.
  • Page 67 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Repeat the scanning steps 12 to 14 four times for every adjustment chart. First time: Set the front side of the adjustment chart face up (turned away from the original glass), with its top edge positioned to the back side.
  • Page 68 Both Sides Adjustment Select whether to continue the scan measurement or to finish the scan measurement and calculate the adjustment value. To continue the scan measurement, press [No]. To finish the scan measurement and calculate the adjustment value, press [Yes]. Pressing [No] returns to the [Scan Adjustment Chart] screen on which the counter of [Chart Sheets] is added by one.
  • Page 69 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Press [Close] to exit the adjustment. Scan Measurement Adjustment is then completed. To register adjustment values in a paper profile, press [Register]. For details about how to register a paper profile, refer to the HTML User's Guide.
  • Page 70 Both Sides Adjustment Press [Both Sides Adj]. Select [Gap], then press [Print Mode]. When the [PRINT MODE] screen is displayed, press Start on the control panel. A test chart is printed out. Press [Exit Print Mode]. 5-11...
  • Page 71 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Measure the gap between the front and back sides at each point of [a] to [d] on the [back] side of the printed out chart. This figure shows an example to measure [a]. The scale resolution is 0.5 mm.
  • Page 72 Both Sides Adjustment When entry processing is completed, press [Adjustment Start]. The entered adjustment values are applied. If [Back Side Magnification Adjustment] is set to [OFF], the value of [d] (adjustment value of the transverse magnification (Horizontal) on the back side) is not applied.
  • Page 73 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L After the adjustment is completed, press [OK]. To finely adjust the adjustment value, continuously proceed to step 4 in "Zoom and Image Shift Adjustment" (page 5-22). Press [Close] to exit the adjustment. Gap Adjustment is then completed.
  • Page 74 Both Sides Adjustment )Chart Adjustment You can print out a Both Sides Adjustment chart, measure measurement points using a scale, and enter measurement values in order to carry out the adjustment. Using this function, you can only enter measurement values to carry out the both-side adjustment. This is convenient when an unclear misalignment is detected between the front and back sides to perform the duplex printing with a new type of paper or to change paper in a tray.
  • Page 75 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Select [Front], then press [Chart Adjustment]. Press [Print Mode]. When the [PRINT MODE] screen is displayed, press Start on the control panel. A test chart is printed out. Press [Exit Print Mode]. 5-16...
  • Page 76 Both Sides Adjustment Measure the line length at each of points [1] to [8] on the printed-out chart using a scale. The figure on the right illustrates an example [ 5 ] [ 1 ] to measure points [1] and [5]. As illustrated in this example, measure the line length at each printed point.
  • Page 77 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L When entry processing is completed, press [Adjustment Start]. In the next step, adjust the back side. Select [Back], then press [Chart Adjustment]. Press [Print Mode]. When the [PRINT MODE] screen is displayed, press Start on the control panel.
  • Page 78 Both Sides Adjustment Press [Exit Print Mode]. Measure a misalignment between the marks of [1] to [4] printed on the [back] side of the output chart and the marks on the [front] side. The figure shows an example to measure [1]. The scale resolution is 0.5 mm.
  • Page 79 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Press [X] or [Y] at each point, and enter the measured value using the keypad, [,], or [+] on the screen. If the printing position is misaligned to the minus (-) side, enter a positive value (+). If the printing position is misaligned to the plus (+) side, enter a negative value (-).
  • Page 80 Both Sides Adjustment Press [Close] to exit the adjustment. Chart Adjustment is then completed. To register adjustment values in a paper profile, press [Register]. For details about how to register a paper profile, refer to the HTML User's Guide. 5-21...
  • Page 81 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L )Zoom and Image Shift Adjustment You can finely adjust the zoom ratio of the print side and the top, bottom, left, and right positions on the front and back sides. Using this function can directly enter the adjustment value in percentage or with the required value. This is convenient when you want to carry out fine adjustment after the chart adjustment or you have the duplex printing result.
  • Page 82 Both Sides Adjustment Press [Front] or [Back] to select the print side to be adjusted. Enter the zoom ratio or the image shift value using the keypad, [,], or [+] on the screen or the Keypad on the control panel. To specify the zoom ratio, press [Vertical] or [Horizontal], then enter a value.
  • Page 83 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Zoom ratio adjustment example: The image on the front side is 10 mm in a lengthwise direction while the image on the back side has been lengthened to 10.1 mm. Press [Vertical] of [Back], then press [1][0][0].

  • Page 84: Image Quality Adjustment

    Image Quality Adjustment Image Quality Adjustment Image Quality adjustment Adjust the color image quality at periodic intervals to maintain consistent printing results against a change in ambient temperature or humidity, a change of this machine conditions, or a change of the color tone due to the paper type or print mode.

  • Page 85: Daily Image Quality Management (Calibration)

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Daily image quality management (Calibration) You can maintain the color image quality by executing calibration at the appropriate timing. The reference value (target) of the entire printing system is registered in advance. Compare this reference value with the current measurement value to adjust the difference, and correct the printing density.

  • Page 86: Calibration Timing

    Image Quality Adjustment )Calibration timing Adjust the daily color image quality at the times and in the order shown below. The adjustment method varies depending on whether or not the Relay Unit RU-509 is installed on the machine. Daily adjustment flow (Standard) This adjustment is required for all customers in daily operations.
  • Page 87 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Daily adjustment flow (High) In addition to "Daily Adjustment Flow (Standard)", carry out adjustments in the following cases, in particular: Immediately before an image, in which the hue is important, is output When the color stability is insufficient (when enhancing the reproducibility)

  • Page 88: Maximum Density Auto Adjustment (Ru)

    Image Quality Adjustment Maximum Density Auto Adjustment (RU) Automatically adjust the maximum density of each of yellow, magenta, cyan, and black, using the output paper density sensor that is installed on the optional Relay Unit RU-509. Carry out this function before carrying out the [Color Density Control] function.
  • Page 89 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Load the paper that has been used to register the target density into the tray. The paper profile of the tray is automatically switched to the paper profile that has been used to register the target density.

  • Page 90: Color Density Control

    Image Quality Adjustment Color Density Control If an optional Relay Unit RU-509 is mounted on this machine, you can configure a setting so that this machine automatically executes calibration at periodic intervals. Calibration is executed every arbitrarily specified number of sheets, and you can keep printing using the appropriate density.
  • Page 91 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Specify each item as follows: [Use Color Density Control] ... [ON] [Periodical Adj. Execution] ... [ON] [Adjustment Execution Timing] ... [Before Job Start] [Chart Tray Setting] ... [OFF] Press [Next]. Specify each item as follows: [Switch Color (1st or 2nd)] ...
  • Page 92 Image Quality Adjustment Press [Close]. Press [Exit [ADJUSTMENT]]. Automatic Adjustment is set. A chart is printed out periodically, and calibration is carried out automatically. Tips Selecting [Color Density Manual Control] can carry out the manual adjustment. 5-33...

  • Page 93: Manual Setting Of Color Density Manual Control

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L )Manual setting of Color Density Manual Control Press [Adjustment] on the [MACHINE] screen. Press [Color Density Control]. Press [Color Density Manual Control]. This function is available only when [Use Color Density Control] is set to [ON] in [Color Density Control] - [Basic Setting].
  • Page 94 Image Quality Adjustment Press [Quality Adj.]. Press [)] of [Screen Pattern] to select a screen. Press [Close]. Press Start. A chart is printed out, and calibration is carried out. 5-35...

  • Page 95: Executing Calibration Using The Image Controller

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Executing calibration using the image controller This section describes how to carry out calibration for daily maintenance using Fiery Command WorkStation and a colorimeter (EFI Spectrometer ES-1000). Tips This section describes how to carry out calibration when using coated paper as an example.
  • Page 96 Image Quality Adjustment Click [Continue]. A chart is printed out in a matter of time after this machine started running. Click [OK]. Securely place EFI Spectrometer ES- 1000 in the calibration cradle, then click [Continue]. Load the measurement page on the measurement guide plate. Follow the instructions on the measurement screen to measure color strips in sequence.
  • Page 97 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L In the same way, measure all colors. When a strip is measured successfully, a check mark is displayed at the side of the color name, and is displayed for the color to be measured next.

  • Page 98: Specifying The Reference Image Quality

    Image Quality Adjustment Specifying the reference image quality To stabilize the image quality of this machine, specify the reference values (targets) of the entire printing system in advance. If you change the setting value in [Custom Screen], hue variations may be drastically changed. If you change the screen, specify the standard image quality following the procedure to avoid hue variations.

  • Page 99: Adjusting The Finisher And Saddle Stitcher

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Adjusting the Finisher and Saddle Stitcher Opening the screen to be adjusted When the finisher or saddle stitcher is mounted on this machine, you can finely adjust various functions such as fold positions or staple positions.

  • Page 100: Adjustable Settings

    Adjusting the Finisher and Saddle Stitcher Press the items to be adjusted. The items displayed on this screen vary depending on the model of the mounted finisher. )Adjustable settings The following shows item examples that are displayed on the screen. The items displayed on this screen vary depending on the model of the mounted optional device.
  • Page 101 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Setting item Description [Fold & Staple Stopper] Adjusts the staple position to reduce the misalignment between the fold and the staples. [Half-Fold Stopper Adj.] Adjusts the half-fold stopper position. [Punch Adjustment] Adjusts punch positions.

  • Page 102: Troubleshooting

    Replenish and Replace Consumables Troubleshooting Replenish and Replace Consumables )Replacing a toner bottle WARNING WARNING WARNING Do not throw the toner bottle or toner into an open flame. The hot toner may scatter and cause burns or other damage. CAUTION CAUTION Do not leave toner-related parts (toner bottles or PC drum units) within easy reach of children.
  • Page 103 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L NOTICE To replace a toner bottle, check the toner type number indicated on the toner bottle cover. Use of incorrect toner bottles may cause the machine trouble. Press on the upper-right corner of the touch panel or Help on the control panel to display the help message.

  • Page 104: Replacing A Staple Cartridge

    Replenish and Replace Consumables )Replacing a staple cartridge If staples run out, the message [Please add staples to the saddle stitcher left side stapler] is displayed on the [MACHINE] screen, and the [Staple Cartridge] indicator changes to red in the [Consumable and Scrap Indicators] display.
  • Page 105 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Press the [Add Stapler] tab of the required saddle stitcher, then follow the on-screen instructions to replace a staple cartridge. The number on the right-hand side of the help message indicates a replacement procedure. To display the next step, press [,].

  • Page 106: Replacing A Waste Toner Box

    Replenish and Replace Consumables )Replacing a waste toner box WARNING WARNING WARNING NEVER throw the waste toner box into a fire. Otherwise, the toner may ignite and cause a dangerous situation. If the waste toner box fills up with waste toner, the message [Waste toner box is full Please replace the box] is displayed on the [MACHINE] screen, and the [Waste Toner Box] indicator changes to red in the [Consumable and Scrap Indicators] display.
  • Page 107 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Press [Consumable/Scrap]. Press the [Waste Toner] tab, then follow the on-screen instructions to replace the waste toner box. The number on the right-hand side of the help message indicates a replacement procedure. To display...

  • Page 108: Clearing Paper Jams

    Clearing Paper Jams Clearing Paper Jams How to view the animation guide If a paper jam occurs on this machine, the message [Mishandled paper / Please remove paper following the guide] is displayed, and the position of the paper jam is displayed on the screen. Check the paper jam position, then follow the guidance to clear a paper jam.

  • Page 109: Illustration Screen For Jam Handling

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L )Illustration screen for Jam handling The overview of the method required to clear the jam is displayed on the [JAM Position] screen. Changing to the Illustration screen displays the procedure guidance, so you can clear a paper jam while checking each step.
  • Page 110 Clearing Paper Jams Remove all jammed paper, then press [Close]. This returns to the [MACHINE] screen. Tips If the paper jam message has not been yet cleared even after all the jammed paper has been removed, the paper jam may have occurred in a place other than the one displayed. Check other places not displayed on the touch panel again.

  • Page 111: If The Specified Paper Is Not Found

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L If the Specified Paper is not Found If paper of the specified paper size is not loaded on a tray at the time of printing, [Controller] is displayed in red. To address this problem, load the specified paper into a tray, or you can forcibly print on the currently loaded paper of a different size.
  • Page 112 If the Specified Paper is not Found Press [Force Print]. Press the tray in which print sheets are loaded. Printing starts using the selected tray. 6-11...

  • Page 113: If An Error Has Been Displayed During Scanning

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L If an Error has been Displayed during Scanning If a problem such as an HDD space insufficiency has occurred, an error message is displayed. Check the message content, then take the appropriate action. This section describes how to handle an HDD space insufficiency.

  • Page 114: Hue Adjustment

    Hue Adjustment Hue Adjustment Various problems, for example, the current hue is different from the previous one or the expected chromogenic effect has not been obtained, are caused due to a change in ambient temperature or humidity, a change of the machine conditions, or a change of the color tone by the paper type or print mode.

  • Page 115: Image Position Adjustment

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Image Position Adjustment The previously adjusted image position may be misaligned by a slight enlargement or reduction of paper that is caused due to a change in ambient temperature or humidity, a change of the machine conditions, usage of a different type of paper, or heat impact of the Fusing Unit.

  • Page 116: Appendix

    Good Use of the HTML User's Guide Appendix Good Use of the HTML User's Guide The HTML User's Guide is included in the User's Guide CD supplied with this machine. Select the desired item on the top page (Home), then check the detailed contents. To view the details about how to use the HTML User's Guide, select [User's Guides] on the top page (Home).

  • Page 117: Name Of Each Component

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Name of each Component External components Name Description ADF (Option) Scans data while automatically feeding an original page by page. This device automatically inverts a double-sided original to scan data. This device cannot be installed on the Printer Model.
  • Page 118 Name of each Component Name Description Dust proof filter A dust proof filter is installed in the built-in cooling fan to keep out dust. Power cord Supplies this machine with electricity. Image Controller IC-415 Required to use this machine as a printer or scanner with the Image Controller IC-415 mounted.

  • Page 119: Internal Components

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Name Description Control panel Restarts Image Controller IC-308, displays its IP address, and carries out reboot processing. Internal components Name Description Main power switch Turns the main power of the machine on or off.
  • Page 120 Name of each Component Name Description Toner bottle cover (Y, M, C, K) Open when placing a toner bottle in the machine. Toner bottles are classified into four colors: yellow (Y), magenta (M), cyan (C), and black (K). Drum unit Generates a print image.

  • Page 121: Control Panel Layout

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Control Panel Layout Name Description Keypad Enter the values such as the number of copies or the zoom ratio. Reset* Returns the contents you entered or changed on the control panel to the default settings.
  • Page 122 Name of each Component Name Description Start LED Indicates the status of this machine with LED colors. • Light up in blue: This machine is ready to start operations. • Light up in orange: This machine is not ready to start opera- tions.

  • Page 123: Convenient Use Of Scan Function (Scan To Smb)

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Convenient Use of Scan Function (Scan to SMB) You can send the scan data as an E-mail attachment, or send it to a shared computer (SMB server) or the FTP server. This section describes the function (Scan to SMB) to send data to the SMB server.
  • Page 124 Convenient Use of Scan Function (Scan to SMB) Check the user name. For Image Controller IC-415 or Image Controller IC-308, "computer name (or domain name)\user name" is required. In Windows Vista/7/Server 2003/Server 2003 R2/Server 2008/Server 2008 R2, select [All Programs] - [Accessories] and open [Command Prompt].

  • Page 125: In A Macintosh Environment

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Add a user to be permitted. Click [Add] on the [Permissions] screen, open [Select Users or Groups], and enter "computer name (or domain name)\user name" into the [Enter the object names to select] field. Then, click [Check Names].

  • Page 126: Step 4: Configure Settings According To Your Environment

    Convenient Use of Scan Function (Scan to SMB) Step 4: Configure settings according to your environment Register destinations that are frequently used. This can reduce the number of steps required to manually enter destinations. Select the [SCAN] screen of this machine to register the SMB server setting. You can also use the [Scan Address Register] on the [UTILITY] screen to register the setting.

  • Page 127: Major Specifications

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Major Specifications NOTICE The specifications of the machine and optional device are subject to a change without notice. Even if the specified paper size and weight are compatible with an optional device, if they are not supported by the entire system including the machine, the paper may not be able to be used.

  • Page 128: Feeding-Related Optional Devices

    Major Specifications Feeding-related optional devices Reference The paper size and weight vary depending on conditions such as setting or finishing. For details about the detailed conditions or specifications, refer to the HTML User's Guide. )Paper Feeder Unit PF-602m Paper tray 1: Tray 3 (upper tray) 2: Tray 4 (lower tray) Specifications...

  • Page 129: Paper Feeder Unit Pf-707

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L )Paper Feeder Unit PF-707 Paper tray 1: Tray 3 (upper tray) 2: Tray 4 (middle tray) 3: Tray 5 (lower tray) Specifications Paper weight 55 g/m to 350 g/m / 13 lb Bond to 93 lb Bond •...

  • Page 130: Large Capacity Unit Lu-202

    Major Specifications )Large Capacity Unit LU-202 Paper tray Specifications Paper weight 64 g/m to 300 g/m / 17 lb Bond to 81 lb Bond • Coated paper: 81 g/m to 300 g/m / 22 lb Bond to 81 lb Bond Paper size •...

  • Page 131: Multi Bypass Tray Mb-506

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L )Multi Bypass Tray MB-506 Paper tray 1: Multi Bypass Tray Specifications Paper weight 62 g/m to 300 g/m / 16 lb Bond to 81 lb Bond 300 g/m / 81 lb Bond has the paper types limited.

  • Page 132: Post Inserter (Folding Unit Fd-503)

    Major Specifications )Post Inserter (Folding Unit FD-503) You can load paper into the upper and lower trays of Folding Unit FD-503 and feed paper to an output-related optional device. On the control panel of the post inserter, you can configure the punch or fold function for paper to be fed from the lower tray.

  • Page 133: Post Inserter Pi-502

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L )Post Inserter PI-502 To use Post Inserter PI-502, mount it in one of Finisher FS-531/FS-532/FS-612. You can load paper into the upper and lower trays of Post Inserter PI-502 and feed paper to an output-related optional device. On the control panel of Post Inserter PI-502, you can configure the punch, staple, or fold function for paper to be fed from the lower tray (the configurable function varies depending on finisher models).

  • Page 134: Output-Related Optional Devices

    Major Specifications Output-related optional devices Reference The paper size and weight vary depending on conditions such as setting or finishing. For details about the detailed conditions or specifications, refer to the HTML User's Guide. )Relay Unit RU-509 Conveyance Unit Specifications Function •...

  • Page 135: Relay Unit Ru-516

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Specifications Paper size • SRA3 w, A3 w, B4 w, SRA4 w/v, A4 w/v, B5 w/v, A5 w/v, A6 w, 13 e 19 w, 12 e 18 w, 11 e 17 w, 8.5 e 14 w, 9 e 11 v, 8.5 e 11 w/v, 5.5 e 8.5 w/v, 8K w, 16K w/v, Foolscap* •...
  • Page 136 Major Specifications Specifications: Straight delivery Sheet volume Primary (main) tray • 2,500 sheets (80 g/m / 21 lb Bond): A4 w/v, B5 w/v, 9 e 11 v, 8.5 e 11 w/v, 7.25 e 10.5 w/v, 16K w/v • 1,500 sheets (80 g/m / 21 lb Bond): SRA3 w, A3 w, B4 w, SRA4 w/v, 13 e 19 w, 12 e 18 w, 11 e 17 w, 8.5 e 14 w, 8K w, Foolscap* •...

  • Page 137: Large Capacity Stacker Ls-505

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L )Large Capacity Stacker LS-505 Output tray 1: Stacker tray 2: Secondary (sub) tray Specifications Function • Stacker tray with carriage • Sort output / group output (Offset output enabled) Paper weight Stacker tray: 50 g/m...

  • Page 138: Large Capacity Stacker Ls-506

    Major Specifications )Large Capacity Stacker LS-506 Output tray 1: Stacker tray 2: Secondary (sub) tray Specifications Function • Stacker tray with carriage • Sort output / group output (Offset output enabled) Paper weight Stacker tray: 50 g/m to 350 g/m / 13 lb Bond to 93 lb Bond Secondary (sub) tray: 40 g/m to 350 g/m...

  • Page 139: Saddle Stitcher Sd-506

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L )Saddle Stitcher SD-506 Output tray Function Fold & Staple Multi Half-Fold Multi Tri-Fold Multi Half-Fold + Trimming Specifications: Fold & Staple Paper weight 50 g/m to 244 g/m / 13 lb Bond to 65 lb Bond...

  • Page 140: Perfect Binder Pb-503

    Major Specifications Specifications: Trim Paper weight 50 g/m to 244 g/m / 13 lb Bond to 65 lb Bond SRA3 w, A3 w, B4 w, SRA4 w, A4 w, B5 w, Paper size • 12 e 18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w, 7.25 e 10.5 w, 8K w, 16K w, Foolscap* •...

  • Page 141: Finisher Fs-531

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L )Finisher FS-531 To use the punch function, the Punch Kit PK-512 or Punch Kit PK-513 is required. Output tray Function Staple Punch 1: Primary (main) tray 2: Secondary (sub) tray Specifications: Straight delivery Paper weight...
  • Page 142 Major Specifications Specifications: Staple Paper weight 60 g/m to 209 g/m / 15 lb Bond to 56 lb Bond Paper size • A3 w, B4 w, SRA4 w, A4 w/v, B5 w/v, A5 v, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w/v, 7.25 e 10.5 w/v, 5.5 e 8.5 v, 8K w, 16K w/v, Foolscap* Tab Paper: A4T v, 8.5 e 11T v •...

  • Page 143: Finisher Fs-532

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L )Finisher FS-532 To use the punch function, the Punch Kit PK-522 is required. Saddle Stitcher SD-510 is required to use the Multi Half-Fold, Multi Tri-Fold, and Fold & Staple functions. Output tray Function Staple...
  • Page 144 Major Specifications Specifications: Staple Paper size • SRA3 w, A3 w, B4 w, SRA4 w/v, A4 w/v, B5 v, A5 v, 13 e 19 w, 12 e 18 w, 11 e 17 w, 9 e 11 v, 8.5 e 14 w, 8.5 e 11 w/v, 7.25 e 10.5 v, 5.5 e 8.5 v, 8K w, 16K v, Foolscap* Tab Paper: A4T v, 8.5 e 11T v •...
  • Page 145 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Specifications: Staple Number of stored copies • 150 sets (2 to 9 sheets stapled, Paper length: 182 mm to 364 mm / 7" to 14" • 75 sets (2 to 9 sheets stapled, Paper length: Other than 182 mm to 364 mm / 7"...

  • Page 146: Finisher Fs-612

    Major Specifications Specifications: Multi Half-Fold / Multi Tri-Fold (with Saddle Stitcher SD-510 mounted) Sheet volume Maximum number of multiple sheets • Multi Half-Fold 50 g/m to 216 g/m / 13 lb Bond to 57 lb Bond: 5 sheets 217 g/m to 300 g/m / 58 lb Bond to 81 lb Bond: 1 sheets •...
  • Page 147 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Specifications: Staple Paper weight 60 g/m to 105 g/m / 16 lb Bond to 28 lb Bond Paper size • A3 w, B4 w, SRA4 w, A4 w/v, B5 w/v, A5 v, 12 e 18 w, 11 e 17 w, 9 e 11 v, 8.5 e 14 w, 8.5 e 11 w/v, 7.25 e 10.5 w/v, 5.5 e 8.5 v, 8K w, 16K w/v, Foolscap*...
  • Page 148 Major Specifications Specifications: Half-Fold / Tri-Fold Paper weight 60 g/m to 105 g/m / 16 lb Bond to 28 lb Bond Paper size Half-Fold output • A3 w, B4 w, SRA4 w, A4 w, 12 e 18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w, 8K w •...

  • Page 149: Multi Puncher Gp-501

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L )Multi Puncher GP-501 Conveyance Unit Function Punch The punch-hole pattern varies according to the die set. For details, refer to the HTML User's Guide. Specifications Function Bypass mode • Transports paper without punch processing.

  • Page 150: Auto Ring Binder Gp-502

    Major Specifications )Auto Ring Binder GP-502 Binder Unit Function Bind Specifications Paper weight Body: 75 g/m to 120 g/m / 20 lb Bond to 32 lb BondCover: 163 g/m to 216 g/m / 44 lb Bond to 57 lb BondTabbed paper: 163 g/m max.

  • Page 151: Banner Tray Unit Mk-740

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L )Banner Tray Unit MK-740 Feeding extension tray, Output extension tray 1: Feeding extension tray 2: Output extension tray Specifications Applicable Feeding exten- Multi Bypass Tray MB-506 unit sion tray Output exten- Output Tray OT-502...

  • Page 152: Authentication Unit Au-201S

    Major Specifications Electronic optional devices Reference For information about optional devices not described below, refer to the HTML User's Guide. )Image Controller IC-602 Specifications Function Built-in image controller Capacity • HDD capacity: 200 GB or more (The HDD in the main body is used partially.) •...

  • Page 153: Original-Related Optional Devices

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Original-related optional devices )Reverse Automatic Document Feeder DF-626 This device does not support the Printer Model. Document Feeder Specifications Function • Simplex original feeding • Duplex original feeding Original type • Simplex original: 35 g/m...

  • Page 154: Weight For Each Size And Copying Speed

    Weight for each size and copying speed Weight for each size and copying speed NOTICE The product specifications are subject to a change without notice. )Weight for each size The paper weight (g/m / lb Bond) or ream weight (kg) unit is used to indicate the paper thickness, which varies depending on the manufacturer.
  • Page 155 PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L bizhub PRESS C1070/bizhub PRESS C1070P/bizhub PRESS C71hc Temperature de- Paper weight 1-minute copying speed (at 1-sided output with plain paper A4 tected by Humidi- (g/m / lb Bond) v / 8.5 e 11 v)
  • Page 156 Weight for each size and copying speed bizhub PRESS C1060/bizhub PRO C1060L Temperature de- Paper weight 1-minute copying speed (at 1-sided output with plain paper A4 v / 8.5 e 11 v) tected by Humidi- (g/m / lb Bond) ty/Temperature...

  • Page 157: Maximum Paper Size And Printing Area

    PRESS C1070/C1070P/C1060/C71hc bizhub PRO C1060L Maximum paper size and printing area The maximum paper size and printing area that are available are as follows. Refer them when you output data or perform an imposition printing. When using the Tray 2 (Main body lower tray): 487.7 mm / 19.20"...
  • Page 158 MEMO 7-43...
  • Page 159 http://www.konicaminolta.com Printed in China A50U958123 2015. 1 © 2013...

This manual is also suitable for:

Bizhub press c71hcBizhub press c1060Bizhub press c1070pBizhub press c1070

Table of Contents