4418-X6X
Fax card removal
1. Remove the rear access cover.
2. Remove the ADF scanner lid assembly.
3. Remove the scanner module assembly.
4. Disconnect J7 (A) from the fax card.
5. Remove four screws (B).
6. Lift and remove the fax card.
PictBridge card assembly with cable removal
1. Remove the rear access cover.
2. Remove the ADF scanner lid assembly.
3. Remove the scanner module assembly.
4. Remove the midframe cover with control panel and risers.
5. Remove the fax card.
4-12
Service Manual