Esc+* Memory Card Clear - SATO CL4NX Programming Reference Manual

14.18 Memory Card
14.18

ESC+* Memory Card Clear

Memory Card Clear
ESC
Hexadecimal
code <1B>
16
Initial value Nil
When the power switch is OFF
Valid range and
term of Valid range within item
command
Valid range between items
[Function]
Clearing the entire contents in memory card (option).
[Format]
<*>a(,bbb)
●Parameter
a [Item to be cleared] =
b [Registration No.] =
[Coding Example1] Clearing 001 of SATO graphic
<A>
<CC1>
<*>G,001
<Z>
[Coding Example2] Clearing 002 of PCX file
<A>
<CC1>
<*>P,002
<Z>
[Coding Example3] Clearing Form Overlay entirely
<A>
<CC1>
<*>R
<Z>
[Supplementary Explanation]
1. Delimit Start of Data Transmission <A> and End of Data Transmission <Z> with this command <*> for use.
2. Specify slot number of Card Slot for Use <CC> prior to this command<*> when using.
[Point]
To clear all data of memory card, use Format <BJF>.
[Note]
Do not turn off the printer while accessing the memory.
*
<2A>
16
G: SATO Graphic
(Clearing graphic registered with Registration of Graphic <GI>)
P: PCX file
(Clearing PCX file registered with Registration of PCX File <PI>)
M: BMP file
(Clearing BMP file registered with Registration of BMP File <GT>)
F: Format
(Clearing format registered with Registration of Format <YS>)
O: True Type font
(Clearing True Type font registered with Registration of True Type Font <BJ>)
R: Form Overlay
(Clearing form overlay registered with Registration of Form Overlay <&S>)
Valid range: 000 to 999 (Omissible)
001 to 999 (Omissible)
(When omitting Registration No., all the registered data will be cleared.)
291
ESC+*
Parameter
a(,bbb)
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
True Type font
Except True Type font