Esc+* Memory Clear - SATO CL4NX Programming Reference Manual

12.12 System
12.12

ESC+* Memory Clear

Memory Clear
ESC
Hexadecimal
code <1B>
16
Initial value Nil
When the power switch is OFF
Valid range and
term of Valid range within items
command
Valid range between items
[Function]
Clears print jobs and specific item in memory.
[Format]
<*>a
●Parameter
a [Item to be cleared] =
Note the job, which is currently in progress, will not be cleared
[Coding Example1] Clear receive and edit buffer
<A>
<*>
<Z>
[Coding Example2] All clear
<A>
<*>X
<Z>
[Coding Example3] Clear user-defined characters <A>
<*>T
<Z>
[Supplementary Explanation]
1. Set this command between Start code<A> and Stop code<Z>.
2. This command<*>(a=X) will clear all the data sent before the command. However, the data which is completely
parsed before the command will not be cleared. X will also clear user-defined characters and form overlay.
[Notes]
1. After the command <*> is executed, have an interval of more than 100ms before sending next print data.
2. The job in printing will not be terminated by the command <*>.
* Parameter
<2A> a
16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
Not specified: Single item buffer, Receive buffer, Edit buffer (reprint is not possible)
Multi item buffer, Receive buffer, Edit buffer (Clears job in parsing)
T : User defined characters
& : Form overlay
X : All clear
(Receive buffer, Edit buffer, User defined characters, form overlay)
252
ESC+*