Esc - SATO CL4NX Programming Reference Manual

7.12 Modification
7.12
ESC+( Reverse Color Print
Reverse Color Print

ESC

Hexadecimal
code <1B>
16
Initial value Nil
When the power switch is OFF
Valid range and
term of Valid range within items
command
Valid range between items
[Function]
Specifying black and white reverse print.
[Format]
<(>aaaa, bbbbb
●Parameter
a[Specification of reverse area in horizontal direction]
b[Specification of reverse area in vertical direction]
[Coding Example] Reverse area in horizontal direction: 200, Reverse area in vertical direction: 70
<A>
<V>50<H>50<P>2<L>0202<X22>,ABC
<V>50<H>50<(>200,70
<Q>2
<Z>
H50 (dots)
V50 (dots)
[Supplementary Explanation]
1. Set this command next after the firm data string to be inversed. If it is set prior to the firm data the data will be printed
in black without inverse.
2. To set print start position, specify Horizontal Print Position <H> and Vertical Print Position <V> prior to this
command.
3. When the print start position is outside of printable area, printing will not be performed due to command error.
4. Do not check the range of parameters.
[Note]
For setting, keep the black print area under 30% of overall label.
[Valid Range]
Head density
8 dots/mm (203 dpi)
12 dots/mm (305 dpi)
24 dots/mm (609 dpi)
( Parameter
<28> aaaa,bbbbb
16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
= Valid range: Refer to the table below
= Valid range: Refer to the table below
70
(dots)
200 (dots)
Reverse area in horizontal
direction
8 to 832
8 to 1248
8 to 2496
29
ESC+(
Valid range (dots)
Reverse area in vertical direction
8 to 20000
8 to 18000
8 to 9600