SATO CL4NX Programming Reference Manual page 250

[Supplementary Explanation]
1. If using the label smaller than the head width, use this command for specifying the label size and adjust the start
point position corresponding to the label size.
2. For specifying the label size, include the size of backing paper.
(
Side alignment, 8dots/mm)
Start point
1
1
100mm
Label
800 dots
80 mm x100 mm
(1200dots)
1249mm
9992dots
80mm
(14988dots)
640 dots
(960dots)
167.5mm
1340 dots
(2010dots)
Value inside ( ) is 12 dots/mm
244