Esc+& Store Form Overlay - SATO CL4NX Programming Reference Manual

7.14 Modification
7.14
ESC+& Store Form Overlay
Store Form Overlay
ESC
Hexadecimal
code <1B>
16
Initial value Nil
When the power switch is OFF
Valid range and
term of Valid range within item
command
Valid range between items
[Function]
Specifying the registration of form overlay.
[Format]
<&>(aab~b)
●Parameter
a [Registration key] =
b [Comment] =
[Coding Example]
<A>
<V>100<H>50<FW>1010V800H750
<V>100<H>50<FW>0505V760H710
<V>150<H>100<XB>0MODEL
<&>01DATA1
<Z>
[Supplementary Explanation]
1. This command saves fixed print contents to the printer and then, Form Overlay Call </> combines the contents with
drawing of general data to print out.
2. Specify this command at the end of data string that is to be stored. Drawing valid range in form overlay registration is
same as printable area.
3. This command can register only one format. Use any code from 01 to 99 as a registration key.
4. To change contents, specify Form Overlay Clear <*>&, and then register new storage data.
5. Invoke registered contents by Form Overlay Call</>.
6. When specifying Label Size <A1>, it will be extracted in the specified area.
[Valid Commands]
<V>
Print position
<XU>
<K2>
Font
<k2>
<S>
<B>
Barcode
<BF>
<2D10>
2D code
<2D50>
Composite
<EU>
Symbol
<WD>
Modification
Graphic <G>
& Parameter
<26> (aab~b)
16
The set command is not maintained.
The set parameter is valid until the next valid setting.
The set parameter is valid until the next valid setting.
Valid range: 01 to 99 (Omissible)
Max. 16 bytes (Omissible)
<H>
<XS> <XM> <XB>
<K4> <K5>
<K3>
<k4> <k5>
<k3>
<M> <WB> <WL>
<BC> <BG> <BI>
<BS> <BL> <BL><d>
<BK> <2D12> <2D20>
<BX> <2D51>
<FW> <(> <RF>
<GM> <GP>
31
ESC+&
<XL> <OA> <OB>
<K8> <K9> <KA>
<k8> <k9> <kA>
<X20> <X21> <X22>
<D> <D><d> <BD>
<BM>
<BV> <2D30> <2D31>
<RM>
<$=> <K1>
<RD>
<KD> <k1>
<KB>
<kD> <U>
<kB>
<X23> <X24>
<BT> <BW> <BP>
<2D32> <BQ>