Esc+Ys Format Registration - SATO CL4NX Programming Reference Manual

14.8 Memory Card
14.8

ESC+YS Format Registration

Format Registration
ESC
Hexadecimal
code <1B>
16
Initial value Nil
When the power switch is OFF
Valid range and
term of Valid range within items
command
Valid range between items
[Function]
Registering print format.
[Format]
<YS>,aaa
●Parameter
a [Format registration number]
[Coding Example]
<A>
<CC>1
<YS>,1
</N>,3,3
<%>0<V>100<H>200<P>2<L>0101<XM>ABC
<Z>
[Supplementary Explanation]
1. When registering multiple formats, Delimit Start of Data Transmission <A> and End of Data Transmission <Z> with
one format.
2. Specify Card Slot for Use <CC> prior to this command when using.
3. Use this command and Registration of Field </N> as a pair.
4. Attempts to re-register with registered No., error will occur, and the targeted content will be printed.
5. The error occurs when specifying unused or specifying the slot which the printer is allocated.
[Notes]
1. Do not turn off the printer while accessing the memory.
2. The maximum registration with </N> is 99 fields. (Refer to the customizable print command of the field registration
(ESC+/N) for the commands can be registered.)
3. The maximum registration with other than </N> is 50 fields. Refer to the customizable print command for the
commands can be registered.)
YS Parameter
<59> <53> ,aaa
16 16
The set parameter is not maintained.
The set parameter is valid until the next valid setting.
The set parameter is valid until the next valid setting.
= Valid Range :
279
ESC+YS
1 to 999