Esc+Q Print Quantity - SATO CL4NX Programming Reference Manual

5.3 Control
5.3

ESC+Q Print Quantity

Print Quantity
ESC
Hexadecimal
code <1B>
16
Initial value aaaaaa=1
When the power switch is OFF
Valid range and
term of Valid range within items
command
Valid range between items
[Function]
Specifying the number of labels to print.
[Format]
<Q>aaaaaa
●Parameter
a[Number of labels to print]
[Coding Example] Number of labels: 2
<A>
<V>100<H>200<P>2<L>0202<XM>ABCD
<Q>2
<Z>
[Supplementary Explanation]
1. Print contents specified by Start of Data Transmission <A> and End of Data Transmission <Z> are regarded as 1
label, and the number of reprints can be specified.
2. Use this command prior to End of Data Transmission <Z>.
[Note]
1. Reprint will be performed based on the specified print quantity. If specifying sequential numbering command <F>,
the value of sequential number that was set up for that field portion will print.
2. When this command is used in combination with Multiple Cutting <~>, the specified print quantity multiplied by
specified value for cutting becomes the number of labels to print.
Q Parameter
<51> aaaaaa
16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
= Valid range: 1 to 999999
12
ESC+Q