Esc+K2 24X24 Dots Kanji In Horizontal Line - SATO CL4NX Programming Reference Manual

8.24 Font
24x24 dots Kanji
8.24
ESC+K2 24x24 dots Kanji in Horizontal
in Horizontal Line
Line
ESC
Hexadecimal
code <1B>
16
Initial value Nil
When the power switch is OFF
Valid range and
term of Valid range within items
command
Valid range between items
[Function]
Specifies 24x24 (width x height) dot horizontal written Kanji character print
[Format]
<K2>an~n
● Parameter
a [Kanji selection mode]
n [Data]
[Coding example 1] Shift JIS HEX code characters, Horizontal magnification: 3, Vertical magnification: 5
<A>
<V>100<H>200<P>2<L>0305
<K2>H81698A94816A83548367815B
<Q>2
<Z>
[Coding example 2] JIS binary code, Horizontal magnification: 2, Vertical magnification: 3
<A>
<V>100<H>200<P>2<L>0203
<K2>B！ J3T！ K%5%H！ <
<Q>2
<Z>
[Supplementary Explanation]
1. HEX characters
2. Binary code
3. Smoothing function validity range
4. Highlighting function validity range
5. Unicode data contains control codes. Be sure to specify the HEX character fonts in Kanji mode to print the correct
code.
6. When the language setting of the printer is Japanese or Simplified Chinese or Traditional Chinese or Korean,
printing follows the language setting.
[Notes]
1. With the highlighting function the character width enlarges proportional with the expansion factor.
2. Using the highlighting function, in some cases, depending on the type of font, characters become squeezed.
[Valid Command]
<V>
Print position
Modification
<P>
K2 Parameter
<4B> <32> an~n
16 16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
= H: HEX character
B: Binary code
I: HEX character letters, smoothing function
C: Binary code, smoothing function
J: HEX character letters, highlight function
D: Binary code, highlight function
K: HEX character letters, smoothing and highlight function
E: Binary character letters, smoothing and highlight function
= Refer to the code table (JIS, Shift JIS, Unicode).
= Kanji Code 4bytes ASCII / 1 Kanji character
= Kanji Code 2bytes / 1 Kanji character
= Horizontal/vertical valid range:
= Horizontal/vertical valid range:
<H>
<L> <%> <&>
90
ESC+K2
factor 3 to 12
factor 1 to 5
<WD>
</> <0>