14.3 Memory Card
14.3
ESC+BJF Memory Card Initialization
Memory Card Initialization
ESC
Hexadecimal
code
<1B>
16
Initial value
Nil
When the power switch is OFF
Valid range and
term of
Valid range within items
command
Valid range between items
[Function]
Specifying the format (initialization) of memory card.
[Format]
<BJF>aaaaaaaa
●Parameter
a [User ID]
=
Specify up to 8 bytes in alphanumeric and symbols
[Coding Example]
<A>
<CC>1
<BJF>satocard
<Z>
[Supplementary Explanation]
1. Specify slot number registered with Card Slot for Use <CC> prior to this command <BFJ> by all means.
2. This command <BFJ> is for formatting a memory card; therefore, it cannot be used in combination with other
commands.
3. Initialization takes sometime. Do not send any command until the initialization finishes.
4. The error occurs when specifying the slot allocated to the printer's memory.
[Note]
Do not turn off the printer when accessing to the memory. When the printer power is off while memory accessing, the
data in the accessed media may be corrupted.
BJF
Parameter
<42>
<4A>
<46>
aaaaaaaa
16
16
16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
273
ESC+BJF