Authorized Ip Configuration Example; Network Requirements; Configuration Procedure - HP 1920 Gigabit Ethernet Switch Series User Manual

Authorized IP configuration example

Network requirements

In Figure 440, configure Switch to deny Telnet and HTTP requests from Host A, and permit Telnet and
HTTP requests from Host B.
Figure 440 Network diagram

Configuration procedure

1. Create an ACL:
a. From the navigation tree, select QoS > ACL IPv4.
b. Click Create.
c. Enter 2001 for ACL Number.
d. Click Apply.
Figure 441 Creating an ACL
2. Configure an ACL rule to permit Host B:
444