Summary: Any Ip Table; Summary: Bandwidth Management Monitor; Summary: Dhcp Table; Figure 6 Any Ip Table - ZyXEL Communications ZyXEL NBG334W User Manual

2.5.2 Summary: Any IP Table

This screen displays the IP address of each computer that is using the NBG334W via the any
IP feature. Any IP allows computers to access the Internet through the NBG334W without
changing their network settings when NAT is enabled. To access this screen, open the Status
screen (see Section 2.5 on page

Figure 6 Any IP Table

2.5.3 Summary: Bandwidth Management Monitor

Select the BW MGMT Monitor (Details...) hyperlink in Status screen. View the bandwidth
usage of the WAN configured bandwidth rules. This is also shown as bandwidth usage over
the bandwidth budget for each rule. The gray section of the bar represents the percentage of
unused bandwidth and the blue color represents the percentage of bandwidth in use.

Figure 7 Summary: BW MGMT Monitor

2.5.4 Summary: DHCP Table

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual
clients to obtain TCP/IP configuration at start-up from a server. You can configure the
NBG334W's LAN and/or Guest WLAN as DHCP server(s) or disable them. When configured
as a server, the NBG334W provides the TCP/IP configuration for the clients. If DHCP service
is disabled, you must have another DHCP server on that network, or else the computer must be
manually configured.
Click the DHCP Table (Details...) hyperlink in the Status screen. Read-only information here
relates to your DHCP status. The DHCP table shows current DHCP client information
(including IP Address, Host Name and MAC Address) of all network clients using the
NBG334W's DHCP server.
NBG334W User's Guide
Chapter 2 Introducing the Web Configurator
37), and click (Details...) next to Any IP Table.
43