Add Or Edit Dns Entry; Dynamic Dns - ZyXEL Communications NR Series User Manual

13.2.1 Add or Edit DNS Entry

You can manually add or edit the Zyxel Device's DNS name and IP address entry. Click Add New DNS
Entry in the DNS Entry screen or the Edit icon next to the entry you want to edit. The screen shown next
appears.
Figure 124 Network Setting > DNS > DNS Entry: Add or Edit
The following table describes the labels in this screen.
Table 72 Network Setting > DNS > DNS Entry: Add or Edit
LABEL
Host Name
IPv4 Address
Cancel
OK

13.3 Dynamic DNS

Dynamic DNS can update your current dynamic IP address mapping to a hostname. Configure a DDNS
service provider on your Zyxel Device. Click Network Setting > DNS > Dynamic DNS. The screen appears
as shown.
Chapter 13 DNS
DESCRIPTION
Enter the host name of the DNS entry. Up to 256 printable ASCII characters are allowed except [
" ], [ ` ], [ ' ], [ < ], [ > ], [ ^ ], [ $ ], [ | ], [ & ], or [ ; ].
You can use the wildcard character, an "*" (asterisk) as the left most part of a domain name,
such as *.example.com.
Enter the IPv4 address of the DNS entry.
Click Cancel to exit this screen without saving.
Click OK to save your changes.
NR/FWA Indoor Series User's Guide
202