Table of Contents
Advertisement
Figure 51 Add Port Trigger Rule
Table 29 Add Port Trigger Rule
LABEL
Name
Incoming Port
End Port
Trigger Port
End Port
Apply
Cancel
9.8 Dynamic DNS Screen
Use this screen to change your NBG7815's DDNS settings. Click Settings > Internet > Dynamic DNS to
show the following screen.
Note: You can register at https://mycloud.zyxel.com/ to get a free accessible-from-anywhere
DDNS account.
Chapter 9 WAN
DESCRIPTION
Type a unique name (up to 15 characters) for identification purposes. All characters
are permitted - including spaces.
Incoming is a port (or a range of ports) that a server on the WAN uses when it sends
out a particular service. The ARMOR Z1 forwards the traffic with this port (or range of
ports) to the client computer on the LAN that requested the service.
Type a port number or the starting port number in a range of port numbers.
Type a port number or the ending port number in a range of port numbers.
The trigger port is a port (or a range of ports) that causes (or triggers) the ARMOR Z1
to record the IP address of the LAN computer that sent the traffic to a server on the
WAN.
Type a port number or the starting port number in a range of port numbers.
Type a port number or the ending port number in a range of port numbers.
Click Apply to save your changes.
Click Cancel to exist this screen without saving.
NBG7815 User's Guide
96
Advertisement
Table of Contents
