Toshiba e-studio166 Service Handbook page 96

(8) If not, use the following procedure to change values and repeat the steps (3) to (7) above.
(Adjustment Mode)
(Key in a value (acceptable values: 0 to 255))
Press the [INTERRUPT] button (stored in memory).
*The larger the adjustment value is, the higher the reproduction ratio and the longer the distance
A become (approx. 0.125 mm/step).
Copied image of the ruler
e-STUDIO163/166/203/206
ADJUSTMENT
(Key in the code [405])
Fig. 3-8
3 - 12
[START]
("AJ" is displayed.)
Feeding direction
© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved