Toshiba e-studio166 Service Handbook page 226

Note: Note:
If an error occurs, repeat the procedure from the first step to retry updating.
(12) Turn OFF the power of the equipment, and disconnect the USB cable.
Note: Note:
After the updating is completed, check each data version in the Setting Mode (08) to confirm that
the data were overwritten properly.
08-900:System firmware ROM version
08-921:FROM internal program
e-STUDIO163/166/203/206
FIRMWARE UPDATING
© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved
6 - 18