List Print Mode (9S) - Toshiba e-studio166 Service Handbook

2.2.4

List Print Mode (9S)

Lists of the function setting, adjustment mode (05), setting mode (08), system setting, memory
dump, etc. can be output in this mode.
ROM versions of the System firmware and scanner (ADF) are printed on the top right of each list.
• T280SY0Wxxx: System firmware ROM version (The "xxx" part is displayed as "0xx" in
e-STUDIO163/203 and "1xx" in e-STUDIO166/206.)
• Vxxxx: Scanner ROM version (ADF ROM version)
<Setting procedure>
101: FUNC (FUNC, 05/08) data list
102: System setting list
[9][START]
List code
[POWER]
[Digital keys]
101:FUNC (FUNC,05/08) Data list
102:FUNCTION list
103: Memory dump list
[9][START] List code
[POWER] [Digital keys]
103:Memory dump list
Outputs a memory dump list of a specified size from a specified address.
Notes:
• Key in 6 digits for the address specification and 4 digits for the size specification.
• Key in using the digital keys as in the table below to enter the letters A to F.
Letter of alphabet A
Digital keys [*] [0]
E.g.)When outputting an 80 size dump list from the address 0x0000A0
Address specification (6 digits)
Size specification (4digits)
© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved
List starts
to be printed
[START]
[START]
[Digital keys]
specification
[Digital keys]
(4 digits)
B C
[*] [1] [*] [2] [*] [3]
Display
0000A0 [0] -> [0] -> [0] -> [0] -> [*] -> [0] -> [0]
0080 [0] -> [0] -> [8] -> [0]
2 - 11
07/02
[POWER]
OFF/ON
Address
specification
[START]
(6 digits)
Size
[START]
D E F
[*] [4] [*] [5]
Key-in order
ERROR CODE AND SELF-DIAGNOSTIC MODE
[POWER]
OFF/ON
e-STUDIO163/166/203/206
2