Toshiba e-studio166 Service Handbook page 34

Confirming and changing of the access code counter value
Auto search
[INTERRUPT]
[8][START]
[POWER]
Displaying
3 digits
Correct
[Digital keys]
Notes:
• A counter value is separated as follows: 1 000 280 070, and is displayed from the high-order
position. Press the reproduction ratio button ([200%] or [25%]) to shift the counter value dis-
play to the 3 digits of the next lower/higher order.
• Change of the counter value can be registered only after the [START] button is pressed. If the
[CLEAR] button is pressed before the registration is completed, the changed value is also
canceled.
• Only the total counter value for each access code can be confirmed.
<Operation procedure>
Follow the procedure bellow to key in an access code when the access code mode is set.
"Displays the access
code mode"
[POWER]
*: Apply the same procedure when the equipment enters the interruption mode.
e-STUDIO163/166/203/206
ERROR CODE AND SELF-DIAGNOSTIC MODE
Access code
Access code
[Digital keys]
Displays
higher digits
[200%]
Displaying
Displays
lower digits
[25%]
[Digital keys]
Key in access code
[Digital keys]
Cancel
[CLEAR]
2 - 14
06/04
Confirm
[200%]
Displays
higher digits
[200%]
3 digits
Displays
lower digits
[25%]
Correct
Stores
value in RAM
Confirm
[25%]
[START]
When an access code
which has already been
registered is entered
"Displays number of copies"
[START]
When an access code
which has not been
registered previously
is entered
© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved
Displaying
3 digits
Correct
[Digital keys]
[POWER]
OFF/ON
Normal
operation