Specifications; Specifications / Accessories / Options / Supplies - Toshiba e-studio166 Service Handbook

1.

SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES

1.1

Specifications

Values in [ ] are for e- STUDIO203/206 in case that the specification is different among
e-STUDIO163/166 and e-STUDIO203/206.
Copy process
Type
Original table
Accepted originals
Copy speed (Copies/min.)
e-STUDIO163/166
Paper size
A4, B5, LT
A5-R, ST-R
A4-R, B5-R, LT-R
B4, LG, FOLIO, COMPUTER
A3, LD
e-STUDIO203/206
Paper size
A4, B5, LT
A5-R, ST-R
A4-R, B5-R, LT-R
B4, LG, FOLIO, COMPUTER
A3, LD
* "–" means "Not acceptable".
* The copy speed in the above table are available when originals are manually placed for single side,
multiple copying.
* When the ADF is used, the copy speed of 16[20] sheets per minute is only available under the fol-
lowing conditions:
• Original/Mode:
• Number of sheets:
• Reproduction ratio:
© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved
Indirect electrophotographic process (dry)
Desktop type
Fixed type (the left rear corner used as guide to place originals)
Sheet, book and 3-dimensional object. The automatic document feeder
(ADF) only accepts paper which are not pasted or stapled. (Single-sided orig-
2
inals: 50 to 127 g/m /13 to 34 lb. Bond) Carbon paper are not acceptable
either.
Maximum size: A3/LD
Drawer
Size specified
16
-
15.5
13
11
Drawer
Size specified
20
-
15.5
13
11
Single side original/A4/LT size. APS/automatic density are not selected.
16[20] or more.
100%
1 - 1
07/02
Bypass feed
Size not specified
16 11
16 11
15.5 11
13 11
11 11
Bypass feed
Size not specified
20 11
20 11
15.5 11
13 11
11 11
SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
PFU
16
-
15.5
13
11
PFU
20
-
15.5
13
11
e-STUDIO163/166/203/206
1