3.8
Adjustment of the Paper Feeding System
3.8.1
Sheet sideways deviation caused by paper feeding
<Procedure>
The center of the printed image shifts to the front
side.
Move the guide to the front side (Arrow
(A) direction in the lower figure).
Feeding direction
Fig. 3-28
1) Loosen the screen.
2) Move the entire guide to the front or rear side.
3) Tighten the screw.
(A)
Fig. 3-30
© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved
[Rear]
Center
[Front]
(B)
3 - 41
The center of the printed image shifts to the rear
side.
Move the guide to the rear side (Arrow
(B) direction in the lower figure).
[Rear]
Feeding direction
[Front]
Fig. 3-29
Center
e-STUDIO163/166/203/206
ADJUSTMENT
3