Download Print this page

Toshiba e-studio166 Service Handbook page 43

Multifunctional digital systems
Hide thumbs Also See for e-studio166:

Advertisement

Classi-
Code
fication
358
ADF
ADF sideways deviation
adjustment
359
Scanner Carriage position adjust-
ment during scanning from
ADF
365
ADF
ADF leading
edge position
adjustment
401
Laser
Fine adjustment of polygo-
nal motor rotation speed
(adjustment of primary
405
scanning direction repro-
duction ratio)
410
Laser
Adjustment of primary
scanning laser writing start
position.
411
421
Drive
Adjustment of
secondary
scanning
direction
reproduction
ratio
(fine adjust-
ment of main
motor speed)
424
Drive
Fine adjust-
ment of exit
motor speed
© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved
Adjustment mode (05)
Default
Func-
<Accept-
Items
tion
value>
ALL
ALL
<0-255>
for single -
ALL
sided orig-
<0-100>
inal
PRT
<0-255>
PPC
<0-255>
PPC
<0-255>
PRT
<0-255>
PPC/
PRT
<0-255>
PPC/
PRT
<0-255>
2 - 23
07/02
RAM
Contents
able
128
SYS
When the value
<121-
increases by "1", the
136>
image of original fed
from the ADF shifts
toward the rear side of
paper by approx.
0.169 mm.
During this adjustment,
the density LED blinks.
128
SYS
When the value
increases by "1", the car-
riage position when
using the ADF shifts by
approx. 0.1 mm toward
the original feeding side.
During this adjustment,
the density LED blinks.
50
SYS
When the value
increases by "1", the
copied image of original
fed from the ADF shifts
toward the trailing edge
of paper by approx.
0.2 mm.
During this adjustment,
the density LED blinks.
130
M
When the value
increases by "1", the
reproduction ratio of pri-
128
M
mary scanning direction
increases by approx.
0.07%. (approx. 0.1 mm/
step)
88
M
When the value
increases by "1", the writ-
ing start position shifts to
168
M
the front side by approx.
0.0423 mm.
When "1" is set at 08-
203, the adjustment
value set at 05-411 will
also be reflected to 05-
410.
125
M
When the value
increases by "1", the
reproduction ratio of sec-
ondary scanning direc-
tion increases by approx.
0.04%.
160
M
When the value
increases by "1", the
rotation becomes faster
by approx. 0.05%.
ERROR CODE AND SELF-DIAGNOSTIC MODE
Proce-
dure
1
1
1
1
1
1
1
1
1
e-STUDIO163/166/203/206
2

Hide quick links:

Advertisement

loading

This manual is also suitable for:

E-studio163E-studio203E-studio206