Paper Alignment At The Registration Roller - Toshiba e-studio166 Service Handbook

3.2.2

Paper alignment at the registration roller

The aligning amount is adjusted by using the following codes in Adjustment Mode (05).
Paper type Weight
Plain paper
64-80 g/m
17-20 lb.
Thick paper 1
81-105g/m
21-28 lb.
Thick paper 2
106-163g/m
29-43 lb.
Thick paper 3
164-209g/m
44-55 lb.
OHP
Envelope
Sub-code
(*1) 0: Long size 1: Middle size 2: Short size
(*2) 0: Long size 1: Middle size 2: Short size 3: Post card
(*3) 0: Long size of OHP film 1: Middle size of OHP film 2: Short size of OHP film
(*4) 0: Long size of Envelope 1: Middle size of Envelope 2: Short size of Envelope
Notes:
1. Long size: 330 mm or longer (13.0 inches or longer)
Middle size: 220-239 mm (8.7-12.9 inches)
Short size: 219 mm or shorter (8.6 inches or shorter)
2. The adjustment of "Post card" is for Japan only.
© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved
Drawer
2 450 (*1)
-
2
-
2
-
2
- -
- -
3 - 5
06/04
PFU Bypass feed
451 (*1) 458 (*1)
- 460 (*1)
- 461 (*1)
- 462 (*2)
- 463 (*3)
- 464 (*4)
e-STUDIO163/166/203/206
3
ADJUSTMENT