Toshiba e-studio166 Service Handbook page 88

[Procedure to key in adjustment values]
In accordance with the procedure described below, make adjustment of each adjustment item so that
the measured values obtained from test copies satisfy the specification.
e-STUDIO163/166/203/206
ADJUSTMENT
<Operation keys>
[0][5]
[POWER]
1
[Digital keys] :Enter the code.
[START] :Current adjustment
value is displayed.
[Digital keys] :Enter adjustment values.
([CLEAR] Use to make corrections)
[INTERRUPT]
[0][9]
:Move to the normal
mode.
Test copy
[0][5]
:Move to the adjustment
mode.
If the test copy does not
satisfy the specified values,
return to step 1 and
repeat the adjustment
procedure.
[Power]
:Exit the Adjustment Mode.
OFF/ON
Fig. 3-5
3 - 4
<Display>
© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved