[B] Adjustment
(1)
Close the ADF.
(2)
Adjust it by turning the adjustment screws on the hinges.
•
Adjust the height on the rear side by means of the screw on the hinge on the feed side of the
ADF.
Turn it clockwise Heightened
Turn it counterclockwiseLowered
•
Adjust the gap on the rear side by means of the screw on the hinge on the feed side of the
ADF.
Turn it clockwisLowered
Turn it counterclockwiseHeightened
© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved
Fig. 3-51
Fig. 3-52
3 - 51
e-STUDIO163/166/203/206
ADJUSTMENT
3