Toshiba e-studio166 Service Handbook page 24

<Operation procedure>
• Input check mode (03): Refer to
• Output check mode (04): Refer to
• Test print mode (07): Refer to
• Adjustment mode (05): Refer to
• Setting mode (08): Refer to
• List print mode (9S):Refer to
• Access code mode (8S):
• Function setting mode (1*):
<Number display>
The numbers are displayed on a 7-segment LED.
A number of more than 3 digits long is separated as follows, and is displayed from the high-order posi-
tion. Press the reproduction ratio button ([200%] or [25%]) to shift the display to the 3 digits of the next
lower/higher order.
E.g.1) Displaying 1,000,000
E.g. 2) Displaying 80,000
e-STUDIO163/166/203/206
ERROR CODE AND SELF-DIAGNOSTIC MODE
P. 2-5 "2.2.1 Input check (Test mode 03)".
P. 2-8 "2.2.2 Output check (Test mode 04)".
P. 2-10 "2.2.3 Test print mode (Test mode 07)".
P. 2-17 "2.2.7 Adjustment mode (05)".
P. 2-33 "2.2.8 Setting mode (08)".
P. 2-11 "2.2.4 List Print Mode (9S)"
P. 2-13 "2.2.5 Access code mode (8S)"
P. 2-15 "2.2.6 Function Setting Mode (1*)"
Fig. 2-2
Fig. 2-3
2 - 4
© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved