Toshiba e-studio166 Service Handbook page 202

22)Blotched image
Defective area
Paper
Separation
Transfer
High-voltage transformer
(Transfer charger)
e-STUDIO163/166/203/206
TROUBLESHOOTING
Fig. 5-22
Step Check items
1 Is the paper type corresponding to its
mode?
2 Is the paper too dry?
3 Is the output from the separation
charger too high?
4 Is the transfer charger case dirty?
5 Is the transfer charger wire dirty?
6 Is the output from the high-voltage
transformer normal?
5 - 42
Prescription
Check the paper type and mode.
Change the paper.
Adjust the output, from the separa-
tion charger.
Clean the transfer charger case.
Clean the transfer charger wire.
Adjust the output. Replace the trans-
former if necessary.
© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved