Setting Mode (08) - Toshiba e-studio166 Service Handbook

2.2.8

Setting mode (08)

The items in the setting code list can be set or changed in this setting mode (08).
Note: Note:
When inputting a 4-digit code (ie. 1000 to 1999), press the [%] button instead of "1" for the thou-
sand's place, and then key in the other 3 digits.
E.g.) 1372: [%] -> [3] -> [7] -> [2]
Classification List of Setting Mode (08)
Classification
ADF [Switchback]
Counter [Double count]
[Total Counter copy]
[Toner cartridge]
[External counter]
[Paper source]
[Fuser unit]
[Media type]
[Error diffusion / Dither]
Image
[Default setting]
[change of paper source]
[Retry]
[Default setting]
[Paper exit]
[Paper size]
Paper feeding
[Paper dimension]
[Auto-toner]
Development
[Developer bias]
[Reset]
[Toner cartridge check]
[Nearly empty]
General
[Page setting]
[Line]
[Access code]
Scanner [Control status]
Main charger bias [Main charger bias]
[Pre-running]
[Temperature]
Fuser
[Status counter]
Transfer bias [Transfer bias]
Separation bias [Separation bias]
© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved
Setting Mode (08)
462
345,346,347,348,349,352,353
388,389
1410
381, 975
356,357,358,374
1372,1378,1380,1382
1385,1386,1388,1411
502
538,550
481
482
480
698,699
224,226
229-0 to 1,230-0 to 1,231-0 to 1,232-0 to 1,
233-0 to 1,234-0 to 1,235-0 to 1,236-0 to 1,
237-0 to 1,238-0 to 1,239-0 to 1,240-0 to 1,
241-0 to 1,242-0 to 1,244-0 to 1,245-0 to 1,
337-0 to 1,338-0 to 1,339-0 to 1,340-0 to 1,
341-0 to 1,471-0 to 1
414
833,834,835,836,837,840,858,859,860,861,862,863
655
695
971
949
203
672
463
805,806,807,808,809,814,819,826,864,865,866,867
439,440,441,523,526
404-0 to 3,405-0 to 3,407,409,410,411,413,
424-0 to 3,425-0 to 3,433-0 to 1,437,438,448,450,451,
452,453,476-0 to 3,515,516,520,521,525-0 to 3,
527-0 to 3,535-0 to 1,536-0 to 3,537-0 to 3,
539-0 to 3,540-0 to 3,541-0 to 3,800-0 to 1,
801-0 to 1,802-0 to 1,804-0 to 1,886,896-0 to 1
400
830,868,869
831,870,871
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 33
07/02
e-STUDIO163/166/203/206
2