User Mode Setting Details - Minolta EPI 054 User Manual

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.06.09
4-3.

User Mode Setting Details

Function No.
U-0
Select whether to turn ON the Mixed Original Detection function or not
For 23 cpm
(high-speed processing).
Copier only
ON: The copier enables its Auto Paper Selection (APS) or Auto Size
Selection (AMS) function for all originals loaded in the ADF (i.e.,
it can make copies from originals of assorted sizes loaded in a
set).
OFF: The copier enables its APS/AMS function only for the first
original loaded in the ADF.
Data
Description
U-4
Select whether to turn ON the Lightweight Original function or not
For 18/23 cpm
when the ADF is used.
Copier only
Data
Description
U-6
Select whether to enable ("ON") a copy cycle or not ("OFF") when it is
For 23 cpm
initiated by pressing the Start key with an original of the smallest
Copier only
detectable size (metric areas: A5 or smaller; inch areas: Letter or
smaller) placed on the Original Glass.
The copy cycle is run using the
paper loaded in the default paper
source.
NOTE
The default setting is OFF for the metric areas and ON for the inch
areas.
[User Mode]
Setting (The default is
Highlighted
<Mixed Original Detection>
0
Mixed Original Detection
function ON function OFF (high-speed
<Lightweight Original>
0
Normal
The original is pressed
against the Original Width pressed against the Origi-
Scale when stopped.
<Smaller Originals>
ON
A warning message is given and
the copier inhibits the start of this
copy cycle.
S-11
.)
1
Mixed Original Detection
processing)
1
Lightweight Original
The original is not
nal Width Scale when
stopped.
OFF