13-4.Drawer-In-Position Detection - Minolta EPI 054 User Manual

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL, MECHANICAL/ELECTRICAL
98.04.24
1174SBM1304A
13-4. Drawer-in-Position Detection
The copier detects that the Drawer is slid into position as follows.
1st Drawer
When the 1st Drawer is slid into the copier, the Drawer Frame presses the 1st Drawer Set
Detecting Switch installed on the back panel of the copier.
2nd Drawer
When the 2nd Drawer is slid into the copier, the Rib on the Drawer Frame blocks the 2nd
Drawer Set Sensor.
Paper Size
1st Drawer Set
Detecting Switches
Detecting Switches S65
S61 S62 S63
1139M060AA
Drawer Frame
<Control>
Control Signal
S65 PWB-A PJ15A-11
Control Signal
PC69 PWB-A PJ2A-2
2nd Drawer Set Sensor PC69
ON OFF
L H
Blocked Unblocked
L H
M-46
1139M061AA
WIRING DIAGRAM
15-B
WIRING DIAGRAM
17-A