Minolta EPI 054 User Manual page 237

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.06.09
For more details, see the "Operator's Manual" shipped with the copier.
2-3. 23 cpm Copier
1. 10-Keys
• Numeric keypad used for setting the num-
ber of copies to be made, zoom ratio, and
Tech. Rep. mode settings.
2. Clear Key
• Clear the number-of-copies setting, zoom
ratio, choice modes setting.
3. Energy Saver Key
• Sets the copier into the Energy Saver
mode.
4. Interrupt Key
• Sets the copier into, or lets it leave, the
Interrupt mode.
5. Panel Reset Key
• Resets the copier to the initial mode.
6. Stop Key
• Stops a multi-copy cycle or a test (F )
operation.
7. Start Key
• Starts a multi-copy cycle or a test (F )
operation.
8. Paper Select Key
• Selects the paper source.
9. Zoom Ratio Select Key
• Selects a fixed zoom ratio.
10. Zoom Up/Down Keys
• Changes the zoom ratio manually.
11. Auto Exposure Mode Key
• Selects either the Auto or Manual
Exposure, or Photo mode.
12. Exposure Control Keys
• Selects the exposure level.
13. Mixed Original Detection Key
• Selects the Mixed Original mode.
14. Orig. Copy Key
• Selects the original-and-copy type.
15. Manual Staple Key
• Effects manual stapling of copies.
16. Finishing Key
• Selects the finishing type.
17. Auto Size Key
• Selects the Auto Size mode.
18. File Margin Key
• Selects the Margin mode.
19. Cover Key
• Selects the Cover mode.
20. Job Memory Select Key
• Calls up a job program previously stored
in memory.
• Stores a job program when used in com-
bination with the Input key.
21. Job Memory Input Key
• Stores a job program in, or erases it from,
memory.
22. Drum Dehumidify Key
• Runs a Drum Dehumidify cycle.
23. Auxiliary Toner Replenishing Key
• Starts an auxiliary toner replenishing
sequence.
24. Meter Count Key
• Gives a display of each of the current
counts of different electronic counters of
the copier.
S-6