Exit/Duplex Switching Unit (Option - Minolta EPI 054 User Manual

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL, MECHANICAL/ELECTRICAL
98.04.24
1174SBM2300A
23

EXIT/DUPLEX SWITCHING UNIT (OPTION)

If the copier is configured with an optional Sorter or Staple Sorter, or Duplex Unit (installed
in the Cabinet), the Exit/Duplex Switching Unit must be fitted to the exit section of the
copier.
The Master Board outputs a signal to energize the Exit/Duplex Switching Solenoid, which
switches the position of the Exit/Duplex Switching Plate. The Unit has a 2nd Paper Exit
Sensor built into it which detects a sheet of paper being fed out of the Unit. (For more
details of switching control, see the Service Manual for "DUPLEX UNIT.")
2nd Paper Exit Sensor PC30
Paper Exit Roller/Rolls
Exit/Duplex Switching Solenoid SL61
Exit/Duplex Switching Plate
Drive Transmitting Gear
(coupled to a gear in the
Exit Section of the copier)
1139M081AA
Exit/Duplex Switching Plate
1139M082AA
M-72