FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 DIS/REASSEMBLY, ADJUSTMENT
98.04.13
1139D209AA
1139D210AA
Make the adjustment
with the Lever in contact
with the metal plate.
1139D211AA
1139D212AA
1139D213AA
6. Unplug the solenoid connector.
7. Remove the harness from the Solenoid Unit
clamps at two places.
8. Remove one screw and the Solenoid Unit.
NOTE
If the solenoid has been removed from the Solenoid
Unit, make the adjustment shown on the left with the
Solenoid Unit installed in the Exit/Duplex Switching
Unit.
9. Remove three screws and the Copy Tray Holder.
10. Remove four screws and the Lower Guide.
D-46